Q3
ERROR CODES - WHAT DO THEY MEAN?
A3
Error 1.Battery inside CD Changer needs to be replaced.
Error 2.CD error message. Mechanism has as eject problem or takes a long time to select CD.
Error 3.CD error message. The pick-up is out of focus during play mode due to scratches on the disc or contamination.
Error 4.Connection problem. Reconnect the data cable.
Error 5.CD error message. Could not read correct data due to CD ROM.
Error 6.CD error message. Could not read data from disc because it is upside-down.
Error 8.Tape Drive system defective. Eating tape or something wrong with the drive system.
Error 9.Weak RF. Try alternate frequency
NO CD.CD error message. No CD is magazine or no magazine in CD Changer.
Clarion DCZ625 Owner Manual
Good luck.
Semper Fi,
Z
Missed the point AGAIN! I don't care about the ejecting issue, I want to know how to get it to play the CDs, i.e. recognise the magazine. The changer is not aware that the magazine has been inserted, therefore it cannot play the discs. I don't care if it won't eject - I'm happy to leave the magazine in permanently. I just want it to play the discs that are in the magazine. Why is it not picking up that the magazine has been inserted?
That explains why it's not loading the discs, but it doesn't even regognise that the magazine is inserted. Is there some kind of sensor or switch that should be activated that isn't functioning properly? I'd understand if it was saying "disc load error" or something like that, but it says "no magazine" so it doesn't even try to load the disc because it thinks nothing's been inserted.
×