Remove parental password on ps2

enter 7444 in the parental controlls password box to reset the password and controll levels

Hi Jessica

There are two methods to reset the Parental Control on a PlayStation 2, the Quick Method and the Easy Method.
The Quick Method to Reset Parental Control

• Power on the PS2
• Press the Reset button
• Inset an R-rated and wait until the board comes up telling you that Parental Control is on
• Hit the Select button
• At the enter password prompt, hit the Select button
• At the Delete password prompt, enter in your password
• Hit the X button

If you do not know the Parental Control password on your Ps2, try the known defaults of 1111 and 7444.
The Easy Method to Reset Parental Control

• Unplug the PS2
• Wait approximately 72 hours

Hope this helps :)

Follow these steps:

1. Turn on the PlayStation 2 and remove any disk that may already be in the device. Then insert a DVD, preferably one that will prompt you for the parental control code. Insert the code and allow the DVD to begin playing.
2. Press the "Select" button once the movie has started. This will bring up a menu. Find the "Settings" icon, and press "X" to enter the "Settings Menu." Scroll down and select the "Parental Controls Menu" and press "X."
3. Reset the "DVD Parental Control Level" to "Off," which will allow any DVD to play without prompting the user for the passcode. You may also choose to set it to level 8, which is the least stringent level.
4. Do not exit the menu after inputting the new settings. Instead, eject the DVD and remove it. This should cause the PlayStation to reset with the new settings enabled. If it does not automatically reset, then manually reset it by either flipping the switch in the back, or by holding the reset button in the front down. Leave the device off for a few seconds.
5. Turn the PlayStation back on and input a DVD that previously required the passcode. The PlayStation should now play the DVD without prompting you for the passcode. If it does, then you're finished. If it still prompts you for the passcode, then start again at step one and try it again.

"quote"
When it asks for a password, press select, then enter 7444 as a password. that will reset the password. Then, enter a new passcode. To can also, using the parental level menu, Change the level to anything you want, or turn it off.

What ever you do, rememeber to eject the disk BEFORE you turn off the console, otherwise the ps2 will not save your changes. "quote"

Did you try 0000? If you set it before and forgot what it was, then that sucks :D

this is not a soultion but does it have forgot your password click on it and it might solve your promblem

Put the DVD in the PS2 and when the prompt for the password appears, press SELECT to bring up the delete password screen and enter the code 7444. Then register a new password.

I think the password most is "0000"

Put a DVD into the PS2 and let it try to load. When the screen says chenge to level four select yes. When the entry window pops up,press the select button on the controller. It should say reset password or something like that. Put in 7444. Then when you rename the password put in 0000. You will have to do it again 0000.
Once the movie starts, not the menu screen, but the movie actually playing, Press Select button again. The PS2 DVD menu should appear. Cursor over to the toolbox or Setup, and press X. Cursor over to the third icon, and press X. Arrow down to PArental and press X. Change the Parental lockout to OFF.

I am not completely sure about the procedure here but the numbers are correct.

mine used to do that as well. But I think code is set as default to 000 so just enter that when it asks.