MY DYMO LETRATAG IS TYPING IN REVERSE WITH LOW INKING AS IF IT IS RUNNING OUT. I HAVE PUT A NEW CARTRIDGE IN. WHAT SET UP DO I NEED TO CHANGE PLEASE?

Hi,
They're *all* thermal ones, none of the dymo printers use ink. When the print is fading it means the batteries are running out, so just replace them!
See the manual here on the Dymo Manuals and Drivers page.

Dymo LetraTAGs are thermal printers, so they don't use ink - just batteries and LetraTAG tapes.
When the print starts to fade it's time to put new batteries in. When the batteries are running out the text fades first even when the motor is still feeding tape.

LetraTag label makers are thermal printers, so they don't use ink - just batteries and LetraTAG tapes.
When the print starts to fade it's time to put new batteries in.

Check to see if you installed the cartridge correctly. Also, try using a different cartridge.

They don't use ink, just the label cartridge. If the print is fading, replace the batteries:
Troubleshooting Poor print quality on Dymo Label Printers

The Dymo label printer capable of printing iron on tape is the Dymo Letratag. There are a couple of model printers

Dymo Letratag - handheld model
Dymo Letratag - desktop model with qwerty keyboard

and the Dymo 18771 Letratag iron on tape is the tape cartridge available.

Yes, DYMO Letratag QX50 ink can be purchased on amazon, click here and take a look Amazon com DYMO Letratag QX50 refills. I hope this was helpful, cheers

The Brother machines require all colors in order to print anything, even just black. You can put a small piece of electrical tape over the clear window on the cartridge and the machine will think it's full.

Its runs on heat. You need to change the batterys. It needs a lot of power to pump the ink onto the tape so, change your batterys. It should do the trick.

It runs on heat transfer. It probably needs new batterys. If youve been on a labeling spree you've most likel killed it.