Wd440 not drying. how does the fluff get emptied?

I don't know much about Whirlpool, but do you need to empty the water/fluff filter or clean the condenser?

Hotp[oint Aquarius WD440 washer /dryer - Has a distinct smell from clothes when washed like stagnant water is lying somewhere in the machine, It has all benn stripped down but cannot find anything wrong. Whats the solution????

HAVE YOU CLEANED THE BIG STEEL FILTER IN THE BOTTOM OF THE DRYER UNDER YOUR TAP ....... THATS WHAT IT MOST POSS IS TO REMOVE BLOCKED FLUFF

This sounds like excess steam in the drum. Check that the drain filter is clean as washer driers rely on cold water being taken in to cool the condenser tank during the drying cycle. If the filter is clear, the tank may be blocked with fluff. You have to open the machine a look for a big plastic tank, usually down the right hand side.

Chec to see if the water pump is plugged with lint or some othe debris

press and hold on off button till the display panel lights up.Then press and hold the on/off button and the start /cancel button together.You will now reset the washing machine settings.And just pick your cycle again

Fluff has blocked the drain hole into the water drawer.Try locating the hole and using a small bore plastic tube **** the debris out of the container.

its either going to be fluff in the float which you can get at by taken the side panel off .or its fluff in the valve behind the water tank

yes, the dryer is pants im afraid. weve had ours going on 4 years & it has broke down every 6-10months - seriously! the dryer will leave clothes hot & steamy but when hung up for 1/4hr they r dry! _ Hotpoint advised us that he machine is esigned his way - but dont believe a word from their corporate b***hit mouths!

This sounds like a faulty pcb and/or inlet valve. see links for prices.

meatballs77 - If you have warranty (the machine is less than 1 year old which yours is) or paid for extended cover then call hotpoint to replace... Hotpoint should be able to fix this - this should be free. call 0870 4422 510

Rememer parts are free up to five years - but there is a £90 callout fee after the first year.(unless you extend the full warranty)