Hi my Muvo TX FM 1g is dead. my comp. know it as a drive but i can't see anything and i can' t format it on windows and DOS. when I format it on DOS, this message come "error in IOCTL call " how can I fix this problem?

Hi,

This is the file system problem. Use the below tool to solve it.

http://ccfiles.creative.com/ManualDn/Applications/PDE/11124/0x46D235F9/CT-RT_PCAPP_2_01_03.exe

BEFORE YOU START

• Check that the MP3 Player Recovery Tool supports your player.
• Ensure that you are using Windows XP® Service Pack 2 32-bit, Windows XP Professional x64 Edition or Windows Vista™ (32-bit or 64-bit version).
• Back up the contents of your player, if possible, as recovering your player may require it to be re-formatted, erasing all content.
• Make sure your player battery is at least 50% charged.
• Detailed usage instructions are available in our Knowledge Base.
  

1. Replace the battery with a fresh battery
2. Format the player with Windows Format.
3. If the player continues to shut off with a refresh battery and Windows' format, reload the player's firmware

hi dear

try this site for your fiemware
http://drivers.softpedia.com/progDownload/Creative-Nomad-MuVo-TX-FM-firmware-11204-Download-9041.html

oke


cropp

you have a bad drive
http://repair4player.org/disassembly_creative.html

hey nick 23 i have that problem too with my muvo tx fm player (256 mb). I`ve visited the site creative.com and downloaded CT-RT_PCAPP_INT_1_0_8_2 and MuVoTXFM_PCFW_1_24_02_a softwares to see if the problem is resolved. If not and you find the solution, please send me a mail to [email protected]. Of course, if i have the solution first i will send you a mail telling how to do about.

I tried for over a month before I finally got this solution today and my player is working just fine.
Try and download the drivers from the following link.
http://www.nodevice.com/driver/MuVo_TX_FM/get34414.html

This needs you to enter a verification code that is hardly recognisable. Try and hit refresh (below the verification code) a dozen of times till it gives you an easy code and download the drivers(just in case you need the drivers again).
Then run the drivers after you have installed your device. You might need to try this a couple of times. It also gave me all my songs back but I reformatted the drive to be really cautious.
Wish you all the best. Hope it works for you as well.

Plug unit in and open my computer, if it can read the unit it will show up as a removable disc, usually drive F:, copy and paste or click and drag music files into this drive to load your player. Good Luck Hope this helps.

well , my friend the first you must try is download an upgrade from the manufacturer site,this can solve your problem.

You could try reinstalling the Creative Mass Storage Driver 1.07.00.250 to get your computer to recognize it again.

Once you have done that, try installing the latest firmware. The last firmware release was in March 2007. If you haven't updated the player's firmware since then, try downloading and installing Creative MuVo TX FM Firmware 1.24.02.

Of course, you'll have to get it to talk to your computer before you can update the firmware.

My MuVO TX was having problems until I installed the latest firmware. The last firmware release was in March 2007. If you haven't updated the player's firmware since then, try downloading it and installing Creative MuVo TX FM Firmware 1.24.02.