Lacie NAS doesn't appear in network

I hope the brothers who has a program Printer Definition "murtec mfx 2010" Windows 7 download link here Vlada graciously

Try connecting a USB mouse & keyboard DIRECTLY to the back of the server (plugging the monitor directly into it as well) then login directly instead of over the network. Repair may be possible if successful.

sounds like a job for the admin folks to solve. could be that an upgrade to one of the software products pushed the compatibility of your pre existing network configuration. That does happen at times..

What system (full description plz) you're running on? Are you ready to pay for assistance or prefer to call locals?

Use one of the rear USB ports. Mind you, my PC won't deal with it when connected to any IUSB port although it's fine when connected to the router. This is driving me mad...

In your office network, for sure, you have a DHCP server who gave the IP addresses to all devices for that network and this seems to be the reason for why you could see your NAS. On home, you also need a DHCP server. You don't say anything about you home network. The best idea is to just make a temporary network with 2 devices: your computer and your NAS by connecting the NAS directly to your computer's network adapter, set the IPV4 IP for that adapter to the same class addresses as your NAS was set by default (usually NAS had "192.168.x.y" where "x" could be 0, 1 or 2 "y" could be any value between 1 and 254, but mostly, 1) and try to access it via http to manage him (need a user name and a password). For NAS default address and username and password, consult NAS user manual. Access it with from your preferred browser using: \\192.168.x.y
Once you gain the control, cut off his DHCP service and tell him to accept the IP address from the network defined DHCP. (btw: one normal DHCP server is allowed on one network! Cascaded DHCP also is allowed, but it's a little bit complicated)
Good luck!

Have the same problem...

Hi there!
Same issue here
Running win XP on my laptop and I have my LaCie NAS on my network and was working fine 'til today.
Issue: unable to access my LaCie NAS
troubleshooting done:1- rebooting NAS 2-power cycling the whole network 3- also tried accessing NAS from a Mac Book (used to be able) 4- nable to ping it by name or by IP
I had one my NAS's shares mapped to Y:, Now I can see the share from my network places but when I go to map network drive the Y: is no more assigned to that share.
My next move would be to re-install the NAS but I want to know and make sure that this will not delete what I have on that NAS.
Thanks to anyone that would jump in and give a hand to a desperate novice in Networking

try restarting you rcomputer

DI-624 (Update to FW 2.70+)

See: http://www.infrant.com/wiki/index.php/Hardware_Compatibility_List_-_Network_Switches/Routers#D-Link