JVC TV crisis.....HELP

My TV was working fine until I switch over to Verizon FIOS. Once the JVC was connected to the FIOS, It suddenly stopped working. When I turned on my JVC it will come on for about 10 seconds shut itself off and the off-timer light start binking. Good sound for about 10sec but no picture. The OFF Timer light will blinks steady,until theTV is unplugged.
I left the TV for a day like this and it kept blinking. Last night I turn the TV on around 0100 hrs and it played for 2hrs as though nothing happen. I than turned it off. Around 0700 the next morning I turn it on and it played for 10 mins and it shut itself off and the off timer started blinking.
The off- timer continue to blink unplug TV then replug it back into the outlet. The TV only stays on for 10sec and shut off and the off-timer. The same thing occurs as before ;when I turn it on, I get a thin line across the middle of the screen. This TV is only 4 years old. Is this TV to old for the new FIOS signal? Is it worth repair dollars?

HELP ------HELP

IrishErin Mar 02, 2008

The timer light keeps blinking, and I can't get the tv to go on

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.
Expert
92 Answers

Yes... i actually work at verizon the tv is to old for fios because fios is so advanced we run off ot 720 to 1080 depending on areas. what kind of box is it? is it the hd box or stb>

Posted on Dec 19, 2008

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

LIFESTYLE 28 Series III System: i have unique problem. My TV is connected to Bose ...

i would try changing ports right at the lifestyle unit ...make sure the port is good

Read full answer

May 18, 2010 • Bose LIFESTYLE 28 Series III System

1helpful

1answer

Tv goes off, then comes on, and volume goes to max

OMG! Verizon Fios at it again with changing boxes! Well let me tell you if you do not loose signal on a DVD using these same inputs ITS NOT YOUR TV!

Whats going on is further into Verizon system you loosing the signal from the VDSL slam outside in the pill box. This thing will need to be replaced and they are going to blame your TV until you just give up and buy a new TV only to figure out its not your TV.

1. Call them back
2. tell them to check there network
3. if that dont work tell them to check it again
4. if you have HDMI use that instead of the scart connections.

I hope you have luck with Verizon Fios there internet rules but there TV service is sub par!

Thanks
rulds2008

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

Read full answer

Jul 17, 2009 • Mitsubishi WD-52525 52" Rear Projection...

6helpful

3answers

Need Verizon FIOS remote code for new PROSCAN 40LC45S

Any current codes for new TVs will be listed at this link:
http://www22.verizon.com/ResidentialHelp/FiOSTV/Remote+Controls/SetUp/QuestionsOne/122830.htm

Read full answer

Jun 07, 2009 • Televison & Video

1helpful

1answer

No codes for remote verizon fios control of tv came with tv or are listed for RC1445 302/oob manual

for my tru-tech i used the auto code finder on the Fios remote instructions it didn t take very long, I can t say the same for my memorex tv though.

Read full answer

May 10, 2009 • TruTech PLV1615T 15 in. LCD Television

0helpful

1answer

Fax stopped operating when FIOS was installed

Verizon is lying to you. fax machines are ANALOG devices and will not work reliablyon DIGITAL phone lines.

Read full answer

Jan 17, 2009 • Canon PIXMA MP830 All-In-One InkJet...

0helpful

1answer

LG LCD TV suddenly won't work

Probably power module bad.

Read full answer

Jul 08, 2017 • LG 42LC2D 42 in. LCD HDTV

2helpful

3answers

Vx37l stopped working with FiOS remote

I read in another forum where Vizio sometimes uses Vidtech codes. I got 0205 to work on my new Vizio V037L with my Verizon FiOS remote (Phillips RC144).

Read full answer

Oct 02, 2008 • Vizio VX37L Television

0helpful

1answer

Zoom Function and Verizon Fios TV

On the verizon FIOS tv box, turn the FIOS STB on, and turn on the tv, tap the following buttons on the Verizon FIOS STB )in this order) 1-Power, then Select, then Menu. This will bring up the FIOS STB HD options. Arrow down to 4:3 Bypass and set the bypass option to 480P. Hit power 2 times, once to turn off, second time to turn STB back on. This should on standard channels give you the zoom feature back. This worked on my Samsunf 5053 TV model.

Read full answer

Apr 30, 2008 • Samsung HP-S5053 Television

2helpful

5answers

The battle: Acer Vs. Verizon FiOS

Verizon needs to apply a firmware update for the Atheros wireless adapter in your notebook. I work for Acer and I end up having to tell people this all day long. If you take this to a wireless router that is not from verizon you will have no problems with your connection. Maybe if enough Fios customers complain they will provide a firmware update for this.

Read full answer

Mar 06, 2008 • Computers & Internet

0helpful

1answer