Flashes chr and won't fire - Nikon D50 Digital Camera

Are you looking to unlock a protected sheet or actually recover the password? I can help you with the former.

Note this will only work to unlock a worksheet. It will not recover the VBA editor password (however this is possible by very hard to explain.)

1) Open the excel sheet you want to unlock,
2) Open VBA editor, (Alt+F11 while in excel)
3) add a module (insert > module)
4) and paste in this code into the main window (big window on the right)

Sub PasswordBreaker()
Dim i As Integer, j As Integer, k As Integer
Dim l As Integer, m As Integer, n As Integer
Dim i1 As Integer, i2 As Integer, i3 As Integer
Dim i4 As Integer, i5 As Integer, i6 As Integer
On Error Resume Next
For i = 65 To 66: For j = 65 To 66: For k = 65 To 66
For l = 65 To 66: For m = 65 To 66: For i1 = 65 To 66
For i2 = 65 To 66: For i3 = 65 To 66: For i4 = 65 To 66
For i5 = 65 To 66: For i6 = 65 To 66: For n = 32 To 126
ActiveSheet.Unprotect Chr(i) & Chr(j) & Chr(k) & _
Chr(l) & Chr(m) & Chr(i1) & Chr(i2) & Chr(i3) & _
Chr(i4) & Chr(i5) & Chr(i6) & Chr(n)
If ActiveSheet.ProtectContents = False Then
MsgBox "One usable password is " & Chr(i) & Chr(j) & _
Chr(k) & Chr(l) & Chr(m) & Chr(i1) & Chr(i2) & _
Chr(i3) & Chr(i4) & Chr(i5) & Chr(i6) & Chr(n)
ActiveWorkbook.Sheets(1).Select
Range("a1").FormulaR1C1 = Chr(i) & Chr(j) & _
Chr(k) & Chr(l) & Chr(m) & Chr(i1) & Chr(i2) & _
Chr(i3) & Chr(i4) & Chr(i5) & Chr(i6) & Chr(n)
Exit Sub
End If
Next: Next: Next: Next: Next: Next
Next: Next: Next: Next: Next: Next
End Sub

5) Then either:
5a) go back to the excel window, click Developer > Macros > select PasswordBreaker
6) Or just hit the play icon (green triangle) in the top of the VBA editor

This will unlock the sheet, and give you a password which will unlock it in the future.

Note: Due to the encryption method used in excel, there are many possible passwords which will unlock the sheet. This will give you "a" password which will work but it will not be the one that you originally set up. Both the original and this one will still work.

HI, I have a SB-400 with cracked housing, and hope to find a broken one to replace my part. Any offer is very much appreciated if you are interested of selling yours! Sincerely, Samantha (utwicky at gmail dot com)

If there are brackets around the CHR, it means the card is locked. SD cards have a slide switch along one edge. The position farthest from the contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card. If the switch is already in the proper position, slide it fully the other way and then back again.

If there are no brackets around the CHR, it means the camera cannot read your memory card. Try a different card.

questions as bare as this are less likely to be answered because they contain no information of value to the reader to assist you in solving the problem.
?chr? charger? chair? character? ( abbreviation)

If the unit is on charge flashes but does not charge, suspect a faulty charge system circuit or a dead battery unit that needs to be replaced.

Please rate my attempt to solkve this question+_+++Thankis for using FIXYA

use following command

For 4" Height
Chr(27) + Chr(67) + Chr(0) + Chr(4)

For 6" Height
Chr(27) + Chr(67) + Chr(0) + Chr(6)

For 12" Height
Chr(27) + Chr(67) + Chr(0) + Chr(12)

problem in cardholder

Go to the Nikon site and upgrade the firmware on your D70 to version 2.0.

Before doing that, try turning the camera off, wait a min, then back on. That sometimes clears the error. The D70 is having trouble reading the card(s) you're putting in. The upgrade fixes that.

see the paper length you are using
ex. 8.5 X 12 "
set the paper length programatically by using following command

?? chr(27)+chr(67)+chr(0)+chr(12)

This could be usefull
https://www.experts-exchange.com/questions/10203190/How-to-directly-send-ESC-code-to-printer.html
Regards
sir dana taylor
[email protected]

to set up page length in inches

?? chr(27)+chr(67)+chr(0)+chr(12) - for 12" page length

to set up page length by lines

?? chr(27)+chr(67)+chr(50) - for 50 lines / page