Aeg 50700 sensorlogic has error code CAand wont

possibly a stuck float

Some companies share generic codes like 'Lw', for low water level or 'DL' for Door Lock. This might help, there are other sites when Googling 'make model error codes'.

AEG Dishwasher Error Codes ' Dr. Dishwasher

www.drdishwasher.com > manufacturer > error-codes

Error/Fault Codes for AEG Dishwashers with an LED Display Fault Code ,10 Symptom: Dishwasher not filling with water. Go to: Why is My Dishwasher Not Filling ...

https://www.manualslib.com/products/Aeg-Ko-Favorit-5270-Vi-3118379.html

well there are several possibility's. What was the washer doing? Rinse or cleaning? If there is standing water in the tub, then the pump went out or is clogged.

This is the manual in EN Sensorlogic 50830 Manual

Error message C3 is most likely indicating the flood switch is triggered. This means water is leaking from under the sump. The C2 error is linked to drain problems which you cleared.

I need to know manufactures year of AEG favorit 80860

Waited half hour; on start up F3 had cleared..pump overheat? Suspect sticky pump bearing..new pump.

probably the main module ie the pcb you were looking at

http://www.kunnig-elektro.de/reparatur/spuelen/aeg/zulauf2.html

in German ... anyway a couple of pictures :)