Thats my identical tv, with the same problem. The geek squad came out and it was diagnosed as the convergence. They orderd a part, and I was told if that did not fix the problem, it was the picture tube. The parts have not yet arrived.. I will post later when fixed to let you know what it was.Thats my identical tv, with the same problem. The geek squad came out and it was diagnosed as the convergence. They orderd a part, and I was told if that did not fix the problem, it was the picture tube. The parts have not yet arrived.. I will post later when fixed to let you know what it was.
Going to at least know what type, make or model of the set to get a awnser for youGoing to at least know what type, make or model of the set to get a awnser for you
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Press Menu then setup Look for Convergence,If you do Not See It listed then you have a Blowed Fuse FL231 on the Deflection Board.
It will be Located on the bottom left hand side Board with FBT flyback Transfomer on the right side of the FBT Look for 3 in a roll small brown looking caps ,These are Fuses, It will be the one in the Middle 0.06amps Partstore.com has them 1-866-925-7278
No,need to diagnose.It a 100% convergence problems.Convergence problems very easy diagnose.The picture look like 3D,colors lines don't lines up.Fuzzy,out of focus.Convergence controls don't work to lines up any colors cross.The tech is cheating u if he said cost $125 to diagnose.If u know how to solders u could fix this convergence problems about $100.U can buy a convergence kit at Websites Tv repair World.com,Tvrepairkits.com.The shop everythings fix parts and labors only $300.
Go to menu setup look for convergeence,see no convergence adjustment.U have an open Fuse at (FL231)located right side of the Flyback Transformer.There is 3 in a roll small
brown rectangle looking caps,but they are Fuses,it will be in the one in the middle.
Go to menu then setup look for convergence if you do not see convergence then you have A open FUSE It will be on right side of FBT flyback transfomer there is 3 of them in a roll they are small brown rectrangler looking caps but ARE FUSES it will be the one in the middle. Replace it and you have a FIXYA.
Go to menu then setup look for convergence if you do not see convergence then you have a open FUSE FL231 it will be on right side of FBT flyback transfomer there will be 3 ina roll they are small brown rectranigler looking caps but are FUSES. It will be the one in the middle.
On the middle circuit board towards rear is a metal wavy plate.On the back side(actually towards screen when looking from rear of unit),the middle screw has a ground wire(light brown) that is loose.
your convergance ampliers have gone bad and need to be replaced along with some resistors and/or pico fuses. the repair my cost you about $350.00. this is the most common failure in rear projection tvs
Thats my identical tv, with the same problem. The geek squad came out and it was diagnosed as the convergence. They orderd a part, and I was told if that did not fix the problem, it was the picture tube. The parts have not yet arrived.. I will post later when fixed to let you know what it was.
Going to at least know what type, make or model of the set to get a awnser for you
×