Rcr311w remote lost my book and cant get remote to work at all . All i use it for is just tv plz help thanks

Hello
Setup codes for Magnavox TV with RCA RCR311W remote control are:
1004, 1014, 1046, 1051, 1060, 1061, 1062, 1066,1067, 1072, 1073, 1074, 1075, 1076, 1077, 1078, 1082, 1083, 1112, 1136, 1161, 1164, 1166, 1176
OK.

You can get the manual on the link below.

http://audiovox2.info/docs/common/RCR311W/RCR311W_OM.pdf

Codes are on this link below.

http://www.rcaaudiovideo.com/remotecodefinder/?sku=RCR311W&productType=TV

I was able to download the complete instruction book. Thank You.

i need to program my radio shack 3 in 1 remote but lost the instructions

Hey go to www.rca.com as they have a link to all the instructions for your remote . As you can also download or print one for future reference .

1) turn on unit

2) press and hold componet button on remote (TV, VCR, etc)
until On/Off lights up

3) press and hold On/Off while holding component button. Light will go out. Continue hoding both buttons until light comes back on.

4) release both buttons. On/Off should stay on.

5) Press On/Off repeatedly until unit turns off.

6) Press the Stop key at bottom.

7) light goes off. Remote is programmed!

CLICK HERE for your user manual.

There are 4 ways to enter the code.

Thanks for using FixYa - A FixYa rating is appreciated!!

CLICK HERE for your manual

Thanks for using FixYa - A FixYa rating is appreciated!!

http://remotefinder.rca.com/default.aspx?site=rca is the only place you have to go to. It works!