Error Code ''SC441'' on Ricoh MP4000 Copier

Question edited tor a lot more clarity and add MAKER, but NO MODEL NUMBER! All questions need full make and model.

Ricoh Aficio 200 - Error Code: SC390

PrintCopy .info https://printcopy.info > code=SC390
Code: SC390; Description: TD sensor error 1. The TD sensor outputs less than 0.5V, 20 s after the TD sensor initial setting has been performed.
Missing: cod ‎' Must include: cod

SOLVED: How fix sc390 cod of ricoh

Fixya https://www.fixya.com > ... > Ricoh
The closest thing is the sc390 code, which means either the toner density sensor or the developer has gone bad, and typically replacing the PCU can fix that ...

• 
  

  SOLVED: Code SC 390

  https://www.fixya.com > ... > Aficio MP6001 Copier
  Code SC 390 the code SC390 occurs when power on the machine. ... Service code sc 390 RICO Aficio 1015 coppier ... Sc 390 cod. what this?

Error Code sc 390

Copytechnet https://www.copytechnet.com > 56632-sc-390-a
Sep 24, 2011 - I've got an Aficio 1018 that's generating sc390 after every 10 copies. I recently fitted new drum, cleaning blade and developer and changed ...
Missing: cod ‎' Must include: cod

• 
  

  Error code SC 390

  https://www.copytechnet.com > forums > 47571-error...
  Dear all Experts i often got an error code sc 390 on my ricoh aficio 270.kindly tell me what to do with this problem.

RICOH Error Code List - mtechsinfo.com

mtechsinfo.com http://www.mtechsinfo.com > files > Ricoh Erro... PDF SC-390-2. Toner density sensor error. SC-391. Developer bias problem or FU103 on Aficio 550/650 Image storage address error. Aficio 551, 551P, 700, 700P.
14 pages

here is a pdf of all the ricoh error codes:

sc863-06 means
Returned, Bad sector in hard drive
http://www.mtechsinfo.com/files/Ricoh%20Error%20Code%20List.pdf

Having problems finding your error code. Here is a complete list of all codes for your printer: http://www.printcopy.info/?l=en&mod=free&chap=erc&brand=Ricoh&model=Aficio%20MP1600

I do find the error code for a different Ricoh model (Aficio 1018).
http://printcopy.info/?l=en&mod=free&chap=erc&brand=Ricoh&model=Aficio%201018

Please verify your model number and error code.

It happen when there is a slight load tansfer belt. What l did was..clean all the rollers & bushings underneath the transfer belt. Threre are 3 rollers..4 bearings & 2 bushings. Remove all stains.. And also you could polish the surface of the transfer belt by using car polish liquid to smoothen the belt rotation

try to reset yellow+107 and tell me what happened

sc441 is a drum motor error. It could be caused by anything from a faulty circuit board to a bad motor, but the most likely fix (and the easiest) is to replace the color PCUs (photoconductor units) which I believe all come as one set.

Turn the machine off and unplug it from the wall, then install the new PCUs, plug it back in and turn it on. There's a good chance your printer will work fine. If the sc441 error comes back, you should contact your local service company and have them take a look at it, because the problem is either electrical or mechanical.

Hope that helps!

i have a ricoh aficio 450 copier.it pick the paper from the tray and after afew seconds the paper will come without coping.(plain paper)

SC 440/441 Main motor Lock/Main Drive section Jam
tray You the condition
01. Press Clear/stop Key (Yellow Key) 2 tarms
02. type 107 same time
03. Press hold down clear key 5 secend ( red key)
Belinkin 1 on the copy counter left hand side
04. type 5 and press # ,type 810 and press #
05. tarn of the machine and tarn ON the machine.
[email protected]
088-01710-950 340

SC441 mean scanner or laser unite problem.Open it and clean laser mirror,or clean scanner door sensor.

sc541 is a fusing unit error code. Can you reset the code in service mode?