Re: The glows are not working ,the relay is not giving an...
WITHOUT ANY OTHER INFORMATION, I WOULD CHECK THE GLOW PLUGS RESISTANCE, THEY SHOULD ALL BE LOW, APPROX 2-3 OHMS. IF THEY ARE GOOD, THE GLOW PLUG RELAY WOULD BE MY NEXT GUESS. I HAVE REPLACED SEVERAL OF THOSE.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
jest pull it out it will pop up do it by hand don't use any tools for that and also like to advise don't pull by wire hold the wiring socket by finger and pull it out otherwise it can be brake wire when you install back push it in, is this information helped you?
I have a 2005 mercedes e320 CDI. The Main inspection is the General inspection in the FSS. You have to go into the fss and confirm the General inspection by giving it a date in the future. That date is for the next inspection.
This system does not work like a conventional system. i have seen this problem many times and it has alwya been theblinker switch input. replace the blinker switch.
computerized oil indicator is only way if no dipstick. turn key halfway on... toggle through steering wheel buttons until check oil function. computer only checks if engine is off for a few minutes. this is for a 2005 cdi e320, might work for you.
×