How to remove finger protection from BIOS of Fujitsu Siemens CELSIUS MOBILE H? Owner of PC is dead. Please help.

16 year old PC (2006) pure junk now.
.DO NOT UPDATE FIRMWARE BIOS
or did you mean this.
OR DID "UNABLE TO UPDAT"E BIOS MEAN
I CAN NOT SAVE SETTINGS IN BIOS.
and bios dates are wrong too.
ANSWER , RTC CMOS COIN CELL is DEAD.
sure it is , not one lasted 16 years ever
so this is legacy PC sold in garage sale for $1??????
https://support.ts.fujitsu.com/indexdown...

leave BIOS firmware code alone or brick this PC you will, BIOS code in EEPROM does not leak out like rusty old bucket of water.

the battery is bad.

support ended
https://support.ts.fujitsu.com/IndexProd...

seen here as proof.

Refix the RAM.

Here's the link you need.. http://ts.fujitsu.com/products/deskbound/workstations/celsius_h700.html
GOOD LUCK!! Please rate me , k? Thanks LUCKY4LYNN2 :)

try taking bios batery off for 10 sec on motherboard

You may need to enable it in bios, maybe with the new os you need to update the chipset drivers or bios!

https://bugzilla.redhat.com/show_bug.cgi?id=114489

There is a patch for that problem.

please i want the all drivers download for fujitsu siemens amilo pro v3515

If you have already tried the usual brightness and contrast controls, the problem most likely is a bad inverter. You can find an inverter for around 10.00 on ebay.

if u r using the connector make sure none of the pins are not bent if u r not make sure the bios settings are correct if this does not work either it must be the battery needs replacing.(the keyboard uses a battery read the manual)