ILO color I have an ilo 32" TV. Plasma screen. After about ten minutes of viewing, the color craps out. Any ideas?

OK, try these codes:

1990
0171

If none work, you MUST post back with your remote control model number. Nobody will be able to help you otherwise.

i have a ilo 32 in hdmi hdtv and i have mine hook up to direct tv .on the back of the receiver plug your red,white and yellow into the audio 1 of the direct receiver. on the back of your ilo tv plug the other end to the av1 and use S-VIDEO ALSO. plug the sat cord to the ant.in. on the tv set remote hit video and go down to s-video and hit ok. you need to plug all three plugs into their color ans the s-video too in the AUDIO section. mine works great !

Most computer power cords are the same as plasma power cords. Sylvania is made by Funai and that mnfg can be contacted for your nearest Funai rep. that supplies parts.

I wish I could help you ,, Can u help me ? I don't have the manual for my 32 ilo tv and I think the brightness need to be adjust -- am only hearing sound, not seeing any picture .

my 42" ilo plasma started going black on the outside to middle, now its totally black and no sound the power indicated lites for a min then the tv shuts off

THROW IT OUT

take it back

my ilo-2600 has lines across the top of the screen.

Try these codes 8202 or 8205. Hope this help.

Use an S-Video cable and change the video mode to S-Video--should work fine. Good luck.