I just bought this system off of a person new in box. When i push the power button all it will do is say hello on the display on the front of systemit wont bootup or nothing. is there a way to fix it or did i get burned.....please help me....thanks in advance.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
How to reset / resolve Error 19H display IFB neptune DX
Follow following steps
1 power on the machine
2 push start / pause button
3 use + or - buttons to bring it to 0H
4 rotate cycle selector / circular knob to reset position
5 Display will change to 1.
6 again push the start/pause button to complete 1 min cycle.
7 after the display shows 0 . rotate cycle selector / circular knob to choose you preferred cycle.
Plug one end of the VGA connection cable into the VGA port on the external display. Tighten the knobs on the VGA connector to secure the cable to the monitor. 2
Plug the other end of the VGA connection cable into the VGA port on the on your Compaq 6910P. The VGA port is located on the back of the device. Tighten the knobs on the VGA connector to secure the cable to the laptop. 3
Plug the external display's power cord into a wall outlet. Power on the device by clicking its "Power" button. 4
Boot your Compaq 6910P. 5
Click on the "Start" button in your task menu. 6
Select "Control Panel," then click "Appearance and Personalization." 7
Click "Personalization" in the window that appears. 8
Select "Display Settings." 9
Select "Mirrored" from the New Display Detected dialog box to have your displays mirror each other. 10
Select "Extended" from the New Display Detected dialog box to have your display function like one, large workspace. 11
Select "External Display Only" from the New Display Detected dialog box to use only your external monitor. 12
Click the "OK" button to keep the changes and exit the setup.
To Program Personal Speed Dial Numbers: (Numbers
71 - 94 only. 1. Press the Feature button, then * 4 2. Enter the 2
digit code (71 - 94). that you want to assign to that phone number 3. Enter
the telephone number, then press the OK softkey 4. Display will show: "Entry
If the above doesn't work, try:
To Program Personal Speed Dial Numbers:
Press [Feature] [*] 
Enter a two-digit code from 71 to 94.
Specify the external line by pressing a line button, a line pool button, or
the intercom button. If you don't specify the external line, the system
automatically chooses a line for the call.
Dial the telephone number you want to program (up to 24 digits).
Record the code and number you have just programmed.
For additional information, contact Aspire Digital, 1606 Lockness Place, Torrance, CA 90501. Phone: 310/856-0630. Fax: 310/856-0634. Email: [email protected] Web site: www.aspiredigital.com. this is the best i can do. but dont waste your time with their website, its just a giant search engine. I already tried for you. Steve