I clicked the release button on my status page, and now my internet isnt working and i cant click anything, whats wrong??

Hi click on tools or settings icon should open a page with all the settings look for SOUND Click it on & check the settings volume adjustments. .good luck

I understand that you are not able to connect to internet through DG834Gv5 as the internet light on the router is RED. I would suggest you to reset and reconfigure the router using the below steps:

RESET:

1. Press and hold the Wireless On/Off and WPS buttons simultaneously until the Power LED turns red (about 6 seconds).

2. Release the Wireless On/Off and WPS buttons. The LED blinks red three times and then turn green when the router has reset to the factory default state. Wait for the router to reboot.

CONFIGURATION:

1. Connect the cable/phone line coming from Internet Service Provider to the WAN port of the router (isolated port).

2. Connect the computer to the router using any one of the 4 available ports.

3. Open a web browser like Internet Explorer, Mozilla Firefox or Safari.

4. Access the router's GUI by typing 'http://192.168.0.1' or 'http://www.routerlogin.com' in the address bar.

5. Login to the router (username = admin password = password unless you have changed it).

6. Click on 'Setup Wizard' at the top of list from the left menu.

7. Select Yes and click Next.

8. It should give you 'PPPoA Detected' and then click on next.

9. Enter the login and password of the ISP and then click on Apply.

10. Once the settings are updated click on 'Router Status' and click on 'Connection Status' button (at the bottom of the page).

11. Click on Connect button.

12. Connecting to server should show 'Connected'.

13. If you receive 'CHAP authentication failed', close the 'Connection status' window and click on 'Basic settings'. Verify the login and password for ISP and apply the setting again.

14. Open up another browser window and try to access internet.

Please do visit http://kb.netgear.com for any technical queries regarding NETGEAR products.

I hope this information allows you to resolve this issue.

Regards

Anand

you cann't
just open tha cartridge and mesure how much toner has left inside
after removing the fill cup




You-Tube video "iMiTopIVMxM" placeholder (do not delete)


if i help you pls vote

Hi Don
Is it just you or can nobody connect wirelessly?
Is the wireless light on on the front of the router?
Anyway. Open your web browser and type in this address 192.168.0.1
don't type anything else and then hit return.
In a moment you should get the gatekeeper popping up asking for the login and password. If they have not been changed they are admin and password.
navigate to the wireless page (I think it says WLAN) and check that it is all set up correctly (and that it is still turned on!)
If it is on, just disable the security (i.e. turn security off) and hit apply.
disconnect your ethernet cable and see if you can connect wirelessly now. If you can then the problem is with your security settings - if not - the the problem could be the wifi card in your computer.
That's about as far as I can help.

I understand that you are not able to go online through your NETGEAR router (dgn2000). Regarding your concern, I would recommend you to please reset and reconfigure your router (DGN2000). It is in this context, please follow the procedure stated below to configure the router:
RESET THE ROUTER:
With the help of a paper clip, press the reset button on the back of the router for 20 seconds (please refer to the label on thth the help of a paper clip. Press it and hold it for 30 seconds and after 30 seconds without releasing the reset button take out the power cable from the router and wait for 20 seconds. After 20 seconds, without releasing the reset button plug the power cable back to the router and keep holding the reset button for another 30 seconds. Now, release the button and take out the power cable wait for 5 seconds then plug it back.
CONFIGURE THE ROUTER:
1. Connect the cable coming from Internet Service Provider to the WAN port of the router (isolated port).
2. Connect the computer to the router using any one of the 4 available ports.
3. Open the browser (like Internet Explorer, Mozilla Firefox, or Safari).
4. Access the router settings, by typing 'www.routerlogin.net', 'www.routerlogin.com' or 'http://192.168.0.1'
5. When prompted for Username and Password please enter Username as 'admin' and Password as 'password' (please note that both Username and Password are case sensitive).
6. Click 'setup wizard' (at the top of list) from left menu.
7. Select yes and click next.
8. It should give you a "PPPoA Detected" and then click next.
9. Enter the Login and Password provided by your ISP and then click on apply.
10. Once the settings are updated click on 'Router Status' and click on 'Connection Status' button (at the bottom of the page).
11. Click on connect button.
12. Connecting to server should show 'connected'.
13. If you receive 'CHAP authentication failed', close the 'connection status' window and click on 'Basic settings'. Please Check the login and password for ISP and apply the setting again. Please NOTE that the Login Name and Password provided by your ISP to you is CASE Sensitive.
14. Open another browser window and try to access the Internet.

I hope this answers your query. If you need any further help, please email us back so that we can continue to work on a solution.

Hi,

Follow the steps below to reset and reconfiure the router:

RESET:

At the back of the router you will find a small tiny hole (which has a small button inside it). Press the button with the help of a paper clip. Press it and hold it from 30 seconds and after 30 seconds without releasing the reset button take out the power cable from the router and wait for 20 seconds. After 20 seconds, without releasing the reset button plug the power cable back to the router and keep holding the reset button for another 30 seconds. Now, release the button and take out the power cable wait for 5 seconds then plug it back.

INSTALLATION:

1. Connect the cable/phone line coming from Internet Service Provider to the WAN port of the router(isolated port).
2. Connect the computer to the router using any one of the 4 available ports.
3. Open the browser (Internet Explorer, Mozilla Firefox or Safari).
4. Access the router usually by typing 'http://192.168.0.1' or 'http://www.routerlogin.com' in the address bar.
5. Login to the router (username = admin password = password unless you have changed it).
6. Click 'setup wizard'(at the top of list) from left menu.
7. Select yes and click next.
8. It should give you a "PPPoA Detected" and then click next.
9. Enter the login and password of ISP click apply.
10. Once the settings are updated click on 'router Status' and click on 'connection status' button(at the bottom of the page).
11. Click on connect button.
12. Connecting to server should show 'connected'.
13. If you receive 'CHAP authentication failed', close the 'connection status' window and click on 'Basic settings'. Check the login and password for ISP and apply the setting again.
14. Open up another browser window and try to access internet

I hope this information allows you to resolve this issue.

If I have helped you, please help me, and rate this suggestion the highest FixYa rating. If you cannot rate this post with the highest rating, then please comment to this post and I will try to help you further.

Regards
Anand

Hi, I would suggest you to reset and then reconfigure the router.

RESET:

At the back of the router you will find a small tiny hole (which has a small button inside it). Press the button with the help of a paper clip. Press it and hold it from 30 seconds and after 30 seconds without releasing the reset button take out the power cable from the router and wait for 20 seconds. After 20 seconds, without releasing the reset button plug the power cable back to the router and keep holding the reset button for another 30 seconds. Now, release the button and take out the power cable wait for 5 seconds then plug it back.

CONFIGURE:

1. Connect the cable/phone line coming from Internet Service Provider to the WAN port of the router(isolated port).
2. Connect the computer to the router using any one of the 4 available ports.
3. Open the browser(Internet Explorer or Mozilla Firefox).
4. Access the router (usually http://192.168.0.1).
5. Login to the router (Username = admin Password = password unless you have changed it).
6. Click 'setup wizard'(at the top of list) from left menu.
7. Select yes and click next.
8. It should give you a "PPPoA Detected" and then click next.
9. Enter the login and Password of ISP click apply.
10. Once the settings are updated click on 'router Status' and click on 'connection status' button(at the bottom of the page).
11. Click on connect button.
12. Connecting to server should show 'connected'.
13. If you receive 'CHAP authentication failed', close the 'connection status' window and click on 'Basic settings'. Check the login and password for ISP and apply the setting again.
14. Open up another browser window and try to access internet.

I hope this information allows you to resolve this issue.


If I have helped you, please help me, and rate this suggestion the highest FixYa rating. If you cannot rate this post with the highest rating, then please comment to this post and I will try to help you further.


Regards
Anand

Hi,
You can reset the IE7 to default settings by going to Tools>select Internet Options> click on Advanced tab> click on Reset>OK. This will undo any wrong settings which is preventing you from opening browser pages.

To change your status
1. sign-in to myspace
(this will take you to your profile overview page)
2. click on Update at the top after or below your status
(this will display a field where you can edit your status)
3. edit your status
4. click on the Done button

If you meant change your status like you can in Messenger to say Offline when really you are online... then no you can't do that on myspace. You could block someone, then they can't see when you are logged in, but they also can't see your profile at all.

-Magnon

your router needs to be configured to let your laptop in the network