Hi i have a pentax E30,after taking a picture it says the card block and does not show the picture taken it will also say the is no image

Consider NOT connecting your camera to your laptop.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa.

It is not the DISPLAY...

The video sensor is having issues...

It is broken anyway... Check out the prices on eBay for new replacement... or even parts donors...

With some serious care, mentoring anti static clean tools...
and industrial magnifiers & vise... and a lot of
luck... Who knows (if you never try... you'll never know)

Take a look (fully protected purchase)

PENTAX Optio 50L 5 2 MP Digital Camera Silver FREE SHIPPING TESTED...

Eleven... (11) available

Carnac the Magnificent

its sound like if the iris motor wont go to the good position its could be the light sensor thats needs to be tested...
?

hope that give you an idea
regards Alan

Have you tried using a card reader to download the pictures from your card to your computer? I bet the pictures are there.

need to go to owners manuel to get it out of night shot mode

I know that usually, you should format the card for the camera that your going to use. Try formating it in the camera and see if that works. Let me know if I can do anything else for you,

Rob

hi cacrom3,when you slide the battery compartment open the memory card is be side the batterys just push it down and let it go it should pop up so you can grab it.

Yeah had me baffeled too. Press the 'menu' button then the 'trash / green' button, one after the other. It unlocked mine.

If u get a lock(A small switch on the left side of the card) on ur card try changing its position.Move it to other side.

Hi, 1.make sure your memory card is not damaged and also formatted by camera ,this is because if card is damaged or not recognized the camera stores image in internal memory which may be full by this time. 2.backup all your data and delete all from internal memory also format the card and try using it. All the best my friend regards sreejith