Question about Whirlpool Duet GHW9150P Front Load Washer
The F11 code is caused by either a CCU failure or an MCU failure...here\'s how to tell:
If your machine starts a cycle and the water fills but the drum NEVER turns, your MCU is bad...it\'s most cost effective to buy a refurbished one and you can get them on eBay for $99 all day long.
If your machine makes it most of the way through a cycle but throws an F11 code during the rinse or spin, your CCU has the relay solder / vibration problem...
Posted on May 26, 2014
Most likely you will need a new board. There is a service on ebay that solders for you. If it doesn't work, they will refund the money back to you. These are notorious for failing with the F11 error code.
Check out this guy, he's helped a lot of people.
Posted on Mar 11, 2010
Pull off bottom panel, there should be a schematic and trouble shooting guide to help you through any questions about you fault code.
Posted on Jan 14, 2010
Tips for a great answer:
Jan 30, 2016 | Dryers
Jan 08, 2016 | Washing Machines
Mar 24, 2015 | Kenmore HE3t 4.0 cu. ft. Front-Load King...
Aug 22, 2014 | Kenmore HE2 Plus Front Load Washer
Mar 30, 2013 | Whirlpool Duet GHW9150P Front Load Washer
Jun 22, 2010 | Whirlpool GHW9400 Front Load Washer
Jun 15, 2010 | Whirlpool Duet GHW9150P Front Load Washer
Apr 01, 2010 | Whirlpool Duet GHW9150P Front Load Washer
Dec 24, 2009 | Kenmore Elite 45986 Front Load Washer
Apr 09, 2009 | Whirlpool Duet GHW9150P Front Load Washer
936 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: