I have a samsung htz 320 home theatre, all is great except can't seem to get video from my ipod to tv. I have tried hooking video cable from reciever to av2 input on tv and still nothing and tried different video settings on ipod. I know I am missing somthing prob somthing stupid, but after a week I still can't come up with anything any advice would be appreciated.

Hey there - did you ever get a solution to this problem? I'm having the exact same problem with my iPod Classic (60gb). I've tried using Sony's online tech support, but to no avail.

how can i solve this problem at the IPOD they say for me www.apple.com\support\ipod

You have several ways to do this. You can hdmi cables from the two units and plug them into your tv if it supports hdmi and run the audio out portion on the back of the tv and hook that into one of the audion inputs on the surround unit. Or you run audio directly out of the bluray using rca, digital coax, or digital optical cable. Turn the surround reciever to the corresponding input that you choose to use.

try resetting the samsung home theatre system by switching it off, then holding the STOP button on the reciever for 5 secs

what you need to do is hook all of your gaming systems into the "in ports" on your gameing switch, then hook the set of cables you want to use to the "out port" then the other end of those cables need to go to the "in port" on the home theatre system (you can pick which in port you would like to use, it should say which is which on the back by the ports) after doing this you need to find the out port on the home theatre system that corresponds with the cables you are using ie, rca component or hdmi. once you find that port you need to hook a cable to that into your 'in port" on your tv., lastly turn on all of your gaming systems, your tv and your home theatre system. and on your home theatre system select which ever port you hooked the gaming switch into, then turn your tv to the correct channel that you hooked the cables into the tv, lastly go through each swithc on your gaming switch to be sure that they all work, if not, you might want to use all the same cables for all connections, ie, all component all rca or all hdmi, i prefer component.

It sounds like a resolution problem to me. Try adjusting the video settings on your set. It may need you to switch modes as some TV's do this (Why I dont know). I have found that even sometimes its the cable service to blame.

why it doesn't come. just connect the RCA cable to the output pins of TV and connect them to the input female jacks of home theatre receiver. or if the TV has optical out and the home theatre reciever had optical in. thats the best option. just connect one optical cable to enjoy the 5.1 sound. tell me clear problem if u r nt solved.

[email protected]
kanny-sounds.blogspot.com

Maybe because is only read audio, like Photos and mp3 audio only, expecially if read format llike "High Mat" to read photos and music, try to go to instructions manual and see the format what your dvd read.

The best way to do this is to run all hdmi cables from the source to the receiver (i.e. from the cable box to the receiver). Then run a single hdmi cable from the "out to tv" or "video/audio" out jack on the receiver to the television. Turn the tv on and select the input you put the hdmi cable in, then on the receiver select whatever you want to watch, i.e. cable.

Run a regular RCA type audio cable from your TV audio out to your Home Theatre audio in. That is what I have done recently with my Samsung LCD and Home Theater. You then have to put your Home Theater on Aux 1 or Aux 2 to get the sound from TV. Ensure your TV's volume is off.
Kurtis