Question about Braun M880 MultiMix Hand Mixer

1 Answer

My Braun Multimix 280 will only operate on highspeed now. Can this be fixed?

Posted by macoil on

Ad

1 Answer

Kjell Bjornar Amundsen

  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

  • Contributor
  • 57 Answers

Yes. You can do two things. Replace the swith curcuit board or replace the triac/tyristor on the board itself. The last solution requires you to unsolder the triac and loosen it from the heatsink(110v veriosn only. 230v version has no heatsink) and test it with a multimeter to establish if it has failed. (Testing of tracs can be googled.) In eather case you will need to open the casing.

1. remove the base palte by lifting the end opposite to the electric cord.
2. Loosen the bottom power outled slider, without removing it fully
3. unclip the curved plastic retainer in the front and unscrew philips head screw.
4. Work around the edges of the two halves until it comes apart and you are able to free the slider from its return spring.

Replace the cicuit board completely if available. Or resolder a new triac observing the orietation of the pins and reattach to the heatsink by riveting/cliping on or whatever applies to you model. Using heat conductive silicon paste between triac and heatsink is a good idea if it is originally fitted (if white paste residues can be seen). The European 230 v version do not have a heat sink, due to the higher voltage and thus lower current opassing through. If the Euro version, simply replace the triac, trim the pins on the back of the board nad put back in place.

Triacs can be obtained from any electronic componets dealer, as long as you can supply the code stamped on it. The Euro version has code TIC226N, which you can find in any component or manufacturer cross refereanse table. TIC226N basically means a 8 amp triac. Triac is simplified just a sort of ac transistor. The US version I do not have the code for, but it must have a higher ampere rating, thus the heatsink

To replace;
Put all internal componets back in place in the right halve. Put the left halve on top and fit properly by gently pressing together. Fit the screw in the front and the retaining clip. Fit the sliding cover by cliping it back on, observing that the notch for the return spring will meet the spring pin on the right side for it to snap in place. The spring pin can be observed through the slots for the sliding cover. Then insert the base plate reversely of how you removed it.

The problems of these mixers, is that if overloaded the maximum current rating of the triac's may be exceeded. This will cause the triacs to short curcuit and therefore will give full power in any mode.
To avoid the problem, avoide heavy batters, heavy doughs and prolonged high load tasks. Otherwise a very handy smart little mixer that should last for years.




My Braun Multimix 280 will only operate on - toolpower_3.jpg
toolpower_5.jpg

Posted on Dec 01, 2010

  • 1 more comment 
  • FRANK Nov 10, 2011

    110V US VERSION USES a Philips BTA208 600B Triac 8amps. I found Triac ok, but switch contacts burned. Switch will pop open (careful...two ball bearings) to clean contacts. A little grease will hold the one tricky ball bearing in place while snapping switch together UPSIDEDOWN.

  • Shelley C
    Shelley C Jan 29, 2014

    Frank, where do the ballbearings go and what did you use to clean the contacts.

  • Kjell Bjornar Amundsen Sep 27, 2016

    I recently upgraded to a 12 amp rating triac on my own 220V euro edition mixer, as the direct replacement of the original one didnt last very long. Perhaps due to it not having a heatsink?

×

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Braun 4642 Mixers user guide


http://www.user-manual-pdf.com/appliance/handmixer/braun/instruction/braun-multimix-4642-handmixer.html

Nov 12, 2012 | Braun M880 MultiMix Hand Mixer

1 Answer

Braun Vario 280 Watt type 480 hand held blender. The bowl top that the hand mixer fitsd into is frozen. The hand held motor works but the shaft in the top that turns the blade is frozen. I don't...


HI.This steps might be as well helpful.let me just clarify that you can't even manually twist the shafting.If the motor is working an yet it will not turn the shaft.Tha shafting bossing might as well been broken misallign inside..Better remove the cover by unscrewing it and then try to observe how the motor works.If it really does turn when ever it is plugg on to the source.Observe also misallign bosssing that connects the shafting and the motor's rotor.Thank you for choosing FIXYA.

Aug 16, 2011 | Braun M880 MultiMix Hand Mixer

1 Answer

Braun multimix won't run on 1st and 2nd speeds--only 3rd speed.


Hi.
This problem has been covered already on this link. Please leave a comment if further assistance is required and I will do my best.

Dec 10, 2010 | Braun M880 MultiMix Hand Mixer

1 Answer

I need a chopper attachment for my Braun M880 multimix hand mixer


See
http://www.smallappliance.com/product.asp?pid=5623&cur=USD&sid=18956&mid=5&gid=18978&prdCls=P&PartsPaNu=1&shopBy=Brand
(2 pages)

And you will find spare parts online for your braun which i believe is model nr 4642 (se baseplate).

For a chopper attachment; you may need bowl plus rotating blade.

You may also use braun's own spare parts finder at:
http://www.service.braun.com/product/product.asp?rg=NA&c=US&l=GB&typ=pf&frmTyp=s&grp=0&s=4642&subgrp=&des=&sgrp=s&sString=4642'HH'HH06'H'MultiMix&seite=2

But you will have to contact one of the authorised service partners to buy.

Sep 01, 2010 | Braun M880 MultiMix Hand Mixer

1 Answer

Necesito un recambio para un multimix braum m880. ¿cómo lo puedo pedir? gracias. mi email: [email protected]


According to my limited spanish I assume you need spare parts?
I suggest braun.com internationally, and also smallappliance.com if you live in the US.
You will find the 4-digit type number required on the base plate.

Feb 17, 2010 | Braun M880 MultiMix Hand Mixer

1 Answer

I've lost the blade for my Multimix 280 watts that goes in the chopper. can I order a replacement?


Yes. You can find spares at smallappliance.com. navigate by brand and category.Your 4-digit type code can be found on the base plate. Otherwise, you can use Braun.com and their spare parts nr locator by searching for the 4-digit product code. Note the number and contact one of the authorized dealers from the list.

Dec 17, 2009 | Braun M880 MultiMix Hand Mixer

Not finding what you are looking for?
Braun M880 MultiMix Hand Mixer Logo

3,655 people viewed this question

Ask a Question

Usually answered in minutes!

Top Braun Food Mixers Experts

Harrie

Level 3 Expert

6740 Answers

Tom Chichester

Level 3 Expert

55960 Answers

ray gallant

Level 3 Expert

68548 Answers

Are you a Braun Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...