Lexmark E250dn Laser Printer Logo
Posted on Jan 12, 2010
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Lexmark E 250 dn printer. Keeps turning off. Switching from blue bulb indicator to exclamation point indiator. Difficult to turn back on by pressing blue arrow button

1 Answer

  • Official Brand Answer 3,344 Answers
  • Posted on Jan 28, 2010
Anonymous
Official Brand Answer
Level 0:

Joined: Jan 08, 2010
Answers
3344
Questions
0
Helped
923071
Points
5508

Hi,
The problem could be several things, the first one could be a Flushing buffer error. That means that the printer did not understand the print job sent to it and has to be reset in order to continue printing. Second could be a memory full error where the print job sent to the printer is too big and the printer memory is not enough. The third could be the printer front door is not closing properly, make sure the toner cartridge is installed correctly and that the front door is closed. That's all I can think of right now.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Wireless printing

Blinking orange means one of the following: 1. The printer is out of range of the wireless access point (wireless router). 2. The printer is trying to communicate with the wireless access point, but the wireless access point is turned off or not working properly. 3. Either the configured printer or the wireless access point has been turned off and back on, and the printer is trying to establish communications with the network. 4. The wireless settings of the printer may no longer be valid.
0helpful
2answers

I have an HP J4540 printer and it stopped working and the exclamation point keeps flashing. We do not know what to do - misplaced our manual. What is the problem?

Don't worry, Please press the Exclamation point, which is telling you some error has occurred while printing or scanning, once you will press the exclamation button that would stop blinking and try to print again, please let me know it works or not
5helpful
2answers

How do I unlock the scanner on a dell laser MFP 1815 dn printer. I can't fax or copy anything. It says the scanner is locked.

There's a little blue toggle switch where the copies/scans come out from.
Pull the blue switch toward you, turn off the printer, wait a few seconds, and turn the printer back on.
0helpful
1answer

Printing Stalled with flashing exclamation light

do a powerflee

1) unplug all cables including power cable.

2) press and hold the On/Off button on the printer for 20 seconds.

3) plug back the cables and try printing.
0helpful
1answer

Erratic indiator on both left right signals

check your turn signal bulbs. usually an indicator one is out
0helpful
1answer

Printer crushes paper sideways while flashing exclamation point indicating paper jam.

If you can't see inside the back where the paper goes, then turn your printer upside down and shake it good, see what falls out of where the paper should go...
27helpful
3answers

I have a lexmark e250dn printer. Today the printer has stopped working. The help ! indicator on the printer is an orange color as well as the toner/and drum indicator is an orange color.The ready indicator...

Here is how to reset the photoconductor kit counter:

1. Make sure the new kit is installed and the printer is turned ON.

2. Open the front panel.

3. Hold the Cancel button in until the front panel LEDs flash.

4. Close the front panel

0helpful
1answer

My lexmark 5400 keeps saying "clear carriage jam". I cannot see anything jammed but i can't use it till whatever is cleared. please help!

  1. Press Power to turn your All-in-One off.
  2. Unplug the All-in-One.
  3. Check for paper jams.
  4. Plug in the All-in-One.
  5. Press Power to turn the All-in-One back on.
If the error exists .. then printer is defective contact lexmark ..
Not finding what you are looking for?

580 views

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

6688 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

k24674

Level 3 Expert

8093 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...