Question about Universal Remote Control MX-3000 LCD Touchscreen Remote Control
Please note that the replacement batteries for the MX3000 Universal Remote Control, p/n's Powercard PC046067-H & PC036067V3 have been discontinued.
TheBatteryStore.com now carries an alternative battery, p/n PL056067V3 which is a 2,100 mAh typical capacity battery that can be used as a replacement.
Please confirm that the connector type is the same as your battery prior to placing your order. We only carry this battery with the Version 3 connector which has a built in pressure release tab.
The link for the product page is: http://www.thebatterystore.com/replacementbatteryforuniversalremotemx-300037v2100mahli-ionpolymerrechargeable.aspx
If you have any questions please contact TheBatteryStore.com at [email protected]
Posted on Jul 29, 2010
Here is a site that sells PC046067-H batteries for the MX-3000 remote (battery part #'s that it replaces are BTPC56067A, PC046067H & PC046067-H). I have checked all of the sites in the other solutions and this one is by far the least expensive replacement battery. I get all of my specialty batteries here and I always recommend them. Here is the link to the site: PC046067-H Battery Replacement for MX-3000 Remote
Posted on Jul 18, 2013
SOURCE: MX3000 Battery replacement
My company carries a replacement battery for the MX3000. The p/n for our replacement is PC036067-(V1 or V3 suffix) You can reach me via email at [email protected] and I will be happy to help you.
There are three important considerations concerning this battery.
1) Please note that the original version, supplied by Universal Remote p/n PC046067-H for the MX-3000, was discontinued by the battery manufacturer. The PC046067-H had a typical capacity of 1800 mah. My company has worked with the manufacturer to provide a replacement that has a typical capacity of 1400 mah but is identical in size to the original although slightly thinner.
2) Universal Remote used two different connectors on the PC046067-H with no deviation of p/n. We carry our replacement with both connectors (our p/ns use suffix V1 and V3 to differentiate). V1 is a simple white plug and V3 is different in that it has pressure tab built in.
Posted on Apr 24, 2009
I would recommend you buy the battery online, you can save a good bit and it is extremely easy to install. You just take off the back from the remote, unplug the old battery and plug the new one in. I would recommend you replace it with this battery here, it is the official replacement battery for that remote:
The picture on the site there also shows you how it sits in the remote, and you can tell it is quite simple to replace it.
Let me know if you any questions or concerns about it, just reply to my answer here and I can help!
Posted on Nov 01, 2010
Tips for a great answer:
May 27, 2010 | Universal Remote Control MX-3000 LCD...
Mar 22, 2009 | Universal Remote Control MX-3000 LCD...
Feb 24, 2009 | Universal Remote Control MX-3000 LCD...
Sep 22, 2008 | Universal Remote Control R7G Remote...
Apr 14, 2008 | Universal Remote Control MX-3000 LCD...
Apr 11, 2008 | Televison & Video
Feb 07, 2008 | Universal Remote Control MX-3000 LCD...
443 people viewed this question
Usually answered in minutes!
Level 3 Expert
Level 2 Expert
Level 3 Expert