Bosch Nexxt 100 Series WFMC1001UC Front Load Washer Logo

Question about Bosch Nexxt 100 Series WFMC1001UC Front Load Washer

1 Answer

Bosch Nexxt 100 series front load washer

I have a Bosch Nexxt 100 series front load washer that completes the wash cycle and then does not drain the water. It sit in rinse for a few minutes with a quiet buzzing noise and then it starts to beep with the rinse button blinking. My guess is the pump is broken, but how do I get to it and check it?

Posted by Anonymous on

  • Anonymous Jan 13, 2010

    Thank-you very much, this did indeed solve the problem. Once I got the water out of the machine I was able to unscrew the cover to the pump filter and low and behold found a sock. The machine is working great now. Thanks again for your help!

  • Anonymous Mar 25, 2014

    I keep getting Code13 on my bosch front load washers

×

Ad

1 Answer

Barry Coates

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Bosch Master
  • 3,463 Answers

You first of all need to check the pump filter.
This should be located at the botom front right of washer.
Look for a drop down flap or cover, once located, unscrew filter anti-clockwise to remove and clean.

The pump itself is directly behind the filter housing, check there is nothing stuck in the housing.
This should solve the prob.
Please leave feedback for my solution.
Thankyou.

Posted on Jan 11, 2010

Testimonial: "I submitted a question and got a very quick response. The response was useful and enabled me to make the repair myself. Thank-you!"

  • Barry Coates
    Barry Coates Jan 13, 2010

    Hi.

    Thanks for your comments, and pleased my solution was successful.

    I wound consider it a great favour if you rate my soltion, as this helps to maintain my status as a Guru.

    Thankyou.

×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have a Bosch Nexxt 700 Series Washing Machine. We have been emptying our washer by shop vac for a couple months now. Nothing in the pump. Once through the wash cycle it will try to drain and then flash...

Is the pump pumping? Have you cleaned all the drain lines including the discharge hose? You may have nothing in the pump but it could be blocked somewhere else.
0helpful
1answer
0helpful
1answer

How to replace a drain motor on a bosch nexxt 100 series washer

Maybe you just need to change the motor brushes. YouTube has some great videos. Spares here on Fixya. Did you check out your filter?

Click if helped.
0helpful
1answer

Nextt 100 frnt load washer wont go past rinse cycle..stops with drum full of water..i cleaned the pump area filter and drain hoses and upper cannister thoroly..whats nexxt??

It can be the program controller unit. You need to check the output to the program controller unit to confirm if the power comes out to the next cycle. Start by following from the inlet opening vavle, the cut off and the motor drive to confirm.
Please see these tips: Repairing Washer
0helpful
1answer

How I can clean fliter for washer machine bosch nexxt 100 series

just unscrew the filter plug located usually front bottom of machine.
0helpful
1answer

Washer will not drain. tried to cycle on spin, rinse and regular wash. Still will not drain and we can't unlock the door.

move machine to outside door. let drain hose hang outside. this will allow most of the water to flow out............the pump may be blocked.................simple things like a small coin will block them........have to open the pump to check........do it near back door if poss as there will still be water inside machine...............
cheers
0helpful
1answer
0helpful
1answer

Cycles take an exceedingly long time to complete

no, the problem is the the valve that stops water from draining is not working. or not shuting off all the way, water will try to fill but never does or does and leaks back out and try again. replace valve/pump, if you take it apart u will find your paperclip u left in u pocket
3helpful
1answer

Front loading washer does not advance past the rince cycle

Check and clean filter, it is usually located behind a plastic panel at the bottom front of the washer, remove cover and unscrew the filter cover anti clockwise, pull out and clean, replace and test, if it still does not drain, then possibly pump blocked or faulty.
Plz rate my solution.
Thanks.
1helpful
3answers

Bosch Nexxt 100 Series washer

Look into your manual, clean outlet filter & refit. Machine will not spin out if filter is clogged.
Not finding what you are looking for?

1,467 views

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85241 Answers

Brad Brown

Level 3 Expert

19163 Answers

Steve

Level 3 Expert

3290 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...