A simple want, and something that has been asked inmany variations in many forums. But just a simple SATA config is not out there.
I'm NOT using the Jmicron port, dont need it. All my drives are SATA. But the various settings in the BIOS allow for only ONE "sweet spot" config.
-I have my OS HDD on SATA 4
-And other SATA drives (HDD and DVD) on the others.
There is SO much confusion amoungst users mostly who are combing IDE and SATA together on this board. Anyone have a clue on the BIOS settings required for the above? THANKS SO much in advance. :)
Look at the support page for MSI P965 NEO V2.
The is a link to download the JMicron SATA driver, however, once i booted the driver from a floppy driver by clicking the F6 in WINXP settupt, it did not work - WINXP install would crash.
WTF is this **** with JMicron.
MSI support is pathetic, it does not even have SATA drivers for P965 NEO...
Hi,
Once you have loaded your main board drivers,configuration should be pretty much automatic.Personnally,I have my dvd drive on the standard IDE ribbon cable header,and 2 SATA HDD.One on each SATA header.After loading The mainboard Drivers,Windows did the rest.I haven't found any need to mess around with any BIOS settings at all.
I currently am using a Biostar P4M900 board,but I have dealt with MSI before,and they are pretty much the same deal.
1,253 views
Usually answered in minutes!
×