Have a ts1f85277 programable thermostat los the instructions on how to reprogram can you help?

Hello Joan, for what you describe, it would seem that the remote control was deprogrammed, you should reprogram it to be able to control the devices you want
I sent you a video with the instructions to program it
I hope you can solve the problem
Greetings Franco Dosil

Hola Joan, por lo que describes, parecer?a que se desprogramado el control remoto, deber?as re programarlo para poder volver a controlar los aparatos que quieras
Te env?o un v?deo con las instrucciones para programarlo
Espero que puedas resolver el problema
Saludos Franco Dosil

Most programmable thermostats have batteries to keep the program from being lost in a power outage. If you thermostat has dead batteries or no batteries a power outage will cause the thermostat to revert to a default setting and it will have to be reprogrammed. Hope this helps.

you have to switch it to settings and reprogram it. find your owners manual and it will tell you how to program your thermostat

Remove the thermostat and just touch the wires together and make it run until heat wave is over then figure it out. Kinda of a pain but at least it be cool

The other "solution" posted here is not a solution. According to this web site: http://www.espenergy.com/faq_honeywell_thermostat.htm


First, replace the batteries with a new set of AA alkaline batteries. If you insert the new batteries within 20 to 30 seconds of removing the old ones, you will not have to reprogram the thermostat. If the bAt Lo indication does not clear itself once new batteries are placed in the device install the batteries backward for 5 seconds, take them out, and reinstall correctly.

So I tried it... put the batteries in backwards. It completely reset the thermostat so I had to reprogram it (which was easy enough). One thing I did that the instructions did not specify. After I removed the batteries, I let it go completely blank before installing them backwards. Then I waited 5 seconds, pulled em out and put them back in correctly and eventually it started flashing indicating it needed to be programmed. HINT: Don't forget to set the current time!

Hi, there is nothing more aggravating than having your household appliances not work.
Like a computer, the "thermostat" (it holds the batteries) retains the information you program (maybe the technician) to set the temperature controls.
The highs and lows can normally be bypassed with the push of a button.
Removing the batteries clears the memory. (Volatile memory).
When this happens, you must reprogram the thermostat so it knows what settings to operate at.
Can you get the instructions on how to program the thermostat? The instructions are usually on a paper on the thermostat lid.

(when changing batteries, remove one battery, then put a new one in its place before removing the next one. This keep some power to prevent the settings from being cleared.

HONEYWELL WEBSITE:
Go to honeywell.com
Under red welcome sign
Bottom red highlighted box literature/image search
Type in thermostat model number
Click on arrow to right
Then click on the PDF files owners manual / installation instructions
If you can’t find what you want, the bottom left and bottom of web
Page, they have homeowners assistance and Home products to get the help you need.

You need to reprogram tstat or take it off of program. If you need help with that email back. Rus

I would suggest a thermostat replacement. if the stat is losing its program and it has power there is really no other alternative

Cricket should have that information. Just call in. Hope that helps :)