I accidentally hit the button Change NTSC/Pal system. And now the pictures jump , can't watch DVD. .Please help how to go back to NTSC TV system now? (The on screen display : can't use it because it jumps alot/can not read the on screen display .Thanks. (TRENT DVD-2251 /DVD PLAYER/ USA )
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The manual seems to indicate that the TV will automatically detect what signal type is present, so PAL should be recognized. There is, however the possibility that the "Color System" setting under the system menu may not be set to "AUTO", but NTSC. This would cause a conflict when detecting PAL input and affect picture. Check the "Color System" and either select PAL or AUTO and see if that helps.
thats cause you have the format wrong ,, it has ntsc or pal,, on your remote,, look for a button labled P/N or N/P or pal or ntsc or mode.. simply put your dvd on and press this button.. to change the format..
If the button isnt there consult your user manual on how to change ntsc to pal and vice versa
Check your DVD player's color system, most multi system dvd player has to be set(PAL or NTSC) manually, NTSC for American standard. Look for this button could be a mechanical switch at the back or at the menu. Some machine need to reboot after setting. Hope this helps
While a modern PAL TV can display NTSC sources (namely DVD players and PAL VHS players that support pseudo-NTSC), an NTSC TV can not display a PAL source, unless it's an expensive multi-standard TV. Sorry pal, bad choice.
Make sure you dont have a disk in the tray.
Hit the Pal.ntsv button 2-3 times.
You will get the picture back.
If not, then you also hit the p.scan button.
Hit that button 2-3 times till you get the picture back.
your player is set to the wrong format ie either ntsc if your in europe or pal if your in america, you need to go to the setup and make sure the dvd setup is for your region. pal in europe,ntsc in america..most dvd players automatically switch.but sometimes people change the settings without knowing.