The Sandisk memory card is not being detected by the printers memory card drive. How do I get it to respond, and how do I get the photos off of the memory card?

Hi

For cards like san disk you have to unlock and remove the password in the drive that is denying user access. And then you have to use a recovery tool to recover back photos from sandisk SD card. A Tool that worked for me more effectively is..

http://www.advancedphotorecovery.com/recover-photos-from-sandisk-microsdhc-card.html

Put the card into the appropriate slot if you have a media card reader on your computer or get a SD to usb adapter for about $5. Open "Computer" the card should be detected as a drive. Browse to the media, might be in a folder called DCIM. Select photos and hit delete.

Awesome... Good Job!

Make sure you are inserting a compatible memory card for your model. Below is the list of compatible digital media memory cards for the Lexmark P350 printer:

• CompactFlash I & II
• Sony Memory Stick, Memory Stick PRO
• Secure Digital (SD) Card
• MultiMediaCard (MMC)
• xD Card
• Sony Memory Stick Duo (with adapter)
• Mini Secure Digital (Mini SD) Card (with adapter)
• Sony Memory Stick PRO Duo (with adapter)
• SanDisk TransFlash Memory Module (with adapter)
• RS-MMC (with adapter)

Guidelines to print via bluetooth:

• You can print photos from a Bluetooth-enabled device such as a camera phone using a USB Bluetooth adapter.
• Make sure that the Bluetooth Enable and Discovery Mode selections on your printer are set to On.
• Insert a USB Bluetooth adapter into the PictBridge port on the front of the printer.

Note: Bluetooth adapter sold separately.

• Once the printer detects the Bluetooth adapter, the following message appears on the printer display for five seconds: Bluetooth Dongle Connected.
• To print photos from your Bluetooth-enabled device, see the documentation that came with the product.

The photos might be encrypted by the camera software, try to load the card with your camera

Many older system will only support standard SD cards up to 2GB and HD SD cards will go above 2GB. It is a limitation of the printer and not an error with the card.

I was told to unplug it, since the printer would not respond. That worked! It reset itself when I plugged it back in and turned it on. Thank you.

when I insert my sandisk in my pc, it will not detect it, please help me. I have valuable data on it

Try inserting the card into the computer. Go to start , then my computer, right click on the drive that has the mini sd card. select format. this will restore the disk, emptying it and bring it back to new condition.
:)

Hi,

Try using.

www.recuva.com