Question about Televison & Video

1 Answer

TATUNG P42HSMR PLASMA TV

Hey people ...i owned this tv for about 14 months then one night the color and picture got staticy...now when you first turn it on, the open up screen comes on but is full of static...then the screen gos to a thin four inch line on the right side...and it wont do much more then that....any thoughts.?....thanks rdm

Posted by on

  • por24 Jun 20, 2008

    picture is static and i have had this tv for about one day....what can i do please help help help !!!

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Mine has a slight whistling sound coming out of it when the cable is on.

Posted on Sep 29, 2008

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a hisense 55" lcd and there seems to be some discoloration sometimes when there is dark colors and appears vertically. Usually looks like a greenish color and is not confined to any certain spo


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.

Oct 04, 2014 | Televison & Video

4 Answers

Green staticy looking outlines


What is model no and brand of your tv ?

How old is your TV?

Have you changed or replaced any parts recently ?


post back this details




SAM ANDERSON

Sep 23, 2008 | Televison & Video

1 Answer

I have an LG 50PS8000 plasma tv which is nearly 2 years old. For the last few months its has occassionally been getting a red haze over the entire screen which either dissapeared on its own or went if you...


I've also had a popping noise on our 50" LG plasma TV, however the picture has not gone, but has turned grainy and colors are weird. Can this also be a blown fuse or a more severe problem (ysus board or similar)?

Apr 08, 2011 | LG 42LC2D 42 in. LCD HDTV

1 Answer

No picture -- white screen -- no sound


With no video and the the colored stripes, it sounds like the LVDS cable needs to be reconnected to the LCD control board or the control board itself is bad. If the unit is only 3-4 months old, it should be covered by warranty

Nov 18, 2008 | Sharp Aquos LC-37GD6U 37 in. LCD HDTV

2 Answers

Power button is green - no blinks / no picture / no sound


Unplug it from the wall, wait 2 minutes and plug it back in. if problem still exists, its probably the main pcb.

Jun 19, 2008 | Dynex 32 in. LCD Flat-Panel HDTV

2 Answers

Screen/Picture Flickering


alo all..

i got problem wif my TV... sony wega trinitron 29inch..

- last 2 night... the TV @ screen slowly lost color for 2-4second... and after that it suddenly turn off for 5-10second and turn back on itself. the led blink 3-5times....

what the problem to my TV?

Jan 09, 2008 | Sony KP-46S25 TV

1 Answer

Static picture or flashing colors pictures wd-52525


HEY AWOOD,THIS SYMPTOM IS DUE TO POWER CAPACITORS GOING BAD IN THE POWER SUPPLY AND THESE CAPS CAN CAUSE A COUPLE DIFFERENT SYMPTOMS,YOURS SEEMS TO BE THE MOST COMMON.IF YOU'RE TECHY ENOUGH YOU CAN REMOVE THE BACK AND GET ACCESS TO THE TWO PLUGS ON THE LITE ENGINE TO TEST (WITH A VOLTMETER) THE 5 VOLT SUPPLY ON I BELIEVE PLUG J19 PINS 1 AND 3.IF LOW THEN REPLACE 6 CAPACITORS ON POWER BD. YOU SHOULD BE ABLE TO SEE IF THEY ARE BAD JUST BY A VISUAL INSPECTION.GOOD LUCK JOE TV

Sep 19, 2007 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

One color distorted and not converged


Not an expensive repair, relitively speaking. Both convergence amps need to be replaced, Ic7001 and Ic7002 ( Panasonic p/n# C5aa00000203) are both Stk392-110 Sanyo built Ic's and cost about 25-30 dollars plus labor to install and a slight convergence set-up...
Bill

Nov 04, 2006 | Panasonic PT-53WX53 53" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76171 Answers

Cindy Wells

Level 3 Expert

6046 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...