Question about OKI C5500n Printer

1 Answer

Hi I have a 542 toner sensor error

Hi I have a 542 toner sensor error
Can you help
Regards

Posted by Anonymous on

  • Anonymous Jan 06, 2010

    Can you supply a picture of what a toner sensor looks like?
    I cannot find a reference to in the user manual. Until I know what I am looking for its rather bewildering
    Thankyou
    Bill

×

Ad

1 Answer

MUSTAFA BULENT KILIMCI

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 166 Answers

You need to clean toner sensor inside the cover
please look user guide on your printer manual

Posted on Jan 06, 2010

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fatal error 983


This error is an "Incompatible toner" error for using non-original Oki toner. The problem is the chip sensor cannot read the chip on the toner. So either the sensor is not working or the toner is defective.
Regards Abhilash How do u rate the service?

Sep 20, 2010 | OKI 9800hdn Laser Printer

2 Answers

Message on window: check toner cartridge 542: C toner sensor error


try a different toner first .... doesn't have to be a full one ... just a different toner box. had the same on a machine and it was only a bad toner cartridge. so the easiest thing to do is swap drum units with toner installed ...
if it turns out to be the cartridge you can have a look at the right side ... there is a hole in it and a white plunger moving there and gives the machine the current toner amount in the cart.

Oct 24, 2009 | OKI C5500n Printer

1 Answer

543:K toner sensor error. How do I fix it?


Hi dianabusk:
You have a bad K (Black) toner cartridge or the sensor is dirty,the sensors are located on the toner cartridge and in the machine where the toner cartridge seats. Try cleaning the sensors and/or replace the K (black) toner cartridge. The sensors are a silver color.

Hope this helps

Sep 26, 2009 | OKI C5150n Led Printer

1 Answer

540 : y toner sensor error


Hi moneybaggz52:
Here is your problem.
Symptom:
When setting up a brand new C5100n or C5300n out of box, a toner sensor error is encountered.

The printer can display any one of the following errors:

543K: TONER SENSOR ERROR

540Y: TONER SENSOR ERROR

541M: TONER SENSOR ERROR

542C: TONER SENSOR ERROR
Cause:
This generally can be caused by two things.

1. The toner cartridge lock lever is not in the correct position.

2. The Transfer Belt lock levers are not in the correct position.
Resolution:

Check the appropriate toner cartridge lock lever (Shown below) and make sure that it is in the correct position.
0.110?openelement&fieldelemformat=gif 2.1ac?openelement&fieldelemformat=gif
CORRECT POSTITION INCORRECT POSITION


Check both transfer belt lock levers (Shown below) to ensure that they are in the correct position.
5.2eea?openelement&fieldelemformat=gif
CORRECT POSITION

10.4086?openelement&fieldelemformat=gif
INCORRECT POSITION
Hopes this helps


May 24, 2009 | OKI C5500n Laser Printer

7 Answers

Sc 542 error code


press clear (yellow) and press 1,0,7 and press and HOLD the stop button 5 secs. (red) press 1 when u see the copy sp mode and press 7 (datalog) and press ok, look for the sc/ jam counter reset. press the execute 2x. turn of the machine in the main switch (orange switch on the lower front side) the shortcut mode is by pressing 7807 na press execute

May 22, 2009 | Ricoh Aficio CL7200 Laser Printer

1 Answer

Oki Printer c3200 error code


Clean the sensor. Reset the printer and that should help you with this error. If thet doesn't work replace the toner cartridge.

Sep 01, 2008 | OKI C3200n Led Printer

4 Answers

Fatal error 163


Fatal Error 161-Toner Sensor Error, Color:Magenta
When magenta toner sensor error has occurred

Fatal Error 163-Toner Sensor Error, Color:Black
When magenta toner sensor error has occurred

Both are Sensor errors....You would first check the lock levers that hold the toner cartridges in, if everything is fine with them then you could possible have toner dust on the sensors. First take out the cartridge that you are having problems with, then use a dust off can and carefully clean out any axcess toner that you can see where the toner sits. there is a sensor that looks like a clear plastic or glass eye that reads the cartridges and it sometimes gets dirty.

Jan 11, 2008 | OKI C5200n Laser Printer

3 Answers

Sc 542 error code


Error SC 542 indicates a fuser temperature problem. Once the error is detected, the printer is toast until you manually clear the error from the keypad. Even though the printer is physically fine, it won?t come ready until the prior error condition is cleared. The magic keystrokes, clear the error code: The Fix In order to clear error SC542, you must perform procedure 5810. Press and hold online + escape, then power on. Use up and down arrow keys to select SP2 Press Enter Use up and down arror to locate SP5 Press Enter Use up and down arrow keys to select 810 Press Enter Confirm the selection Power off and on. The error code is now cleared.

Aug 13, 2007 | Ricoh Aficio 2015 Copier

Not finding what you are looking for?
OKI C5500n Printer Logo

Related Topics:

705 people viewed this question

Ask a Question

Usually answered in minutes!

Top OKI Office Equipment & Supplies Experts

Timothy Van Der...

Level 2 Expert

152 Answers

Mike

Level 3 Expert

4369 Answers

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Are you an OKI Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...