Question about Maytag EPIC MFW9700S Front Load Washer

1 Answer

Maytag Epic We have purchase a New washer it is a maytag epic only l week old and we had to open it during the cycle and now we cannot get it to start up again we have done the troubleshooting for the error (Fl) which says to press cancel twice then turn power on select extra spin cycle and rinse spin then start and the error keeps coming up. You can here it click but the door doesn't lock or it wont start any suggestions

Posted by on

  • jlrich55 Feb 04, 2008

    thank you for your help we are going back to the dealer!!!!

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,554 Answers

The control board has loose solder connections around the relays.

see this
diff model same issue with new boards as they make them all.
http://www.fixya.com/support/t364216-whirlpool_duet_ht_ghw9400pl0

being it is in warranty its too early for you to fix it yourself.
you will have to wait for them to come out and say the parts are on backorder.

Posted on Feb 04, 2008

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I push the power button and when I hit start it just shuts off. The only cycle that works is spin on my maytag epic z


Any luck? the certified Maytag repair company looked at mine and quoted $445. for the repair. it is 15 months old so of course the warranty is obsolete. The solution is a new CCU panel and Temperature sensor. Good luck.

Aug 30, 2011 | Maytag EPIC MFW9700S Front Load Washer

1 Answer

Maytag Epic Z with error codes F20 and F24


my epic will start & wash & then gets F 20 & won't drain until I hit start again

Oct 16, 2009 | Maytag EPIC MFW9700S Front Load Washer

1 Answer

Washer flashing 02 F. Maytag epic washer won't spin -flashing 02 F about 15 minutes into the cycle. We just had new electrical components put into it.


You need to use the HE detergent. I believe that is a drain problem. By using the regular detergent that causes more suds and in turn clogs your drain

Jul 16, 2009 | Maytag EPIC MFW9700S Front Load Washer

1 Answer

During the wash cycle on a maytag epic mfw9800tq0 my daughter opened the door and after water splashed on the floor she slammed the door shut. It will not drain and spin out now. the tub will agitate...


if she could open the door during wash cycle the door lock is broken and you may need a new one also inspect pumpn and tub to pump hose for foreign objects

Jul 07, 2009 | Maytag EPIC MFW9700S Front Load Washer

1 Answer

My maytag epic z washer will not wash. You select


This is a control issue. the chip set on the control or, timer module, are damaged. replacing the control or, timer, will fix this issue.

Jun 25, 2009 | Washing Machines

2 Answers

Maytag Epic Z Washer has object between drum and tub.


I had the same rattling during spin cycle of my Maytag 4000 series front loading washer. Noticed you could gently pull back on the rubber gasket between the tub and where the door seals. There was a quarter resting against the fixed ring the tub spins in. Problem solved. And I have further realized that long hair can build up in this same spot. But if you didn't know to pull back on the gasket you wouldn't see it. Good luck!

e58c8277-9a05-4a0b-ba6b-e8db67caaa33.jpg


20190816_083801-apy0hbzx41yu0zsjevfqwy5c-3-2.jpg

Jun 23, 2009 | Maytag EPIC MFW9700S Front Load Washer

1 Answer

Maytag Epic giving F11 error code!


ths.gardenweb.com/forums/load/.../msg1012004912002.html

Jun 22, 2009 | Maytag EPIC MFW9700S Front Load Washer

Not finding what you are looking for?
Maytag EPIC MFW9700S Front Load Washer Logo

262 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

jimorris77

Level 3 Expert

411 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

Bill Long

Level 3 Expert

606 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...