At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: I have a pioneer plasma tv about 2 yrs old.It goes to...
Check batteries on ur remote even hide it in other room/if not it could be power supply over heats it
will shut down/another thing go to menu reset to factory default.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
time to start considering the purchase of a new energy efficient LED unit to replace the plasma unit
talk with a tv repair shop to get a diagnosis of the impending failure to get some idea of the repair costs
Fault with its main board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ . In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
The Media Receiver is the tuner/connector selector box.
If the top is removed the Media Box goes into shut down mode. It requires resetting by a Pioneer Authorised Service tool.
Try restting it by unplugging the tv for a few mins and it should rest to original factory default settings but leave it unplugged 10-15 mins to be sure.
Hi these pioneers are difficult to work on you are better off taking it to a technician you will save a lot of headaches trying to fix it. If you still want to do it the first thing I would suspect is teh siganl board.
Picture goes to high green with retrace lines that shows picture tube is defective and requires replacement. Usually in above symptom, TV goes to standby mode and standby light blinks when green raster problem occurred. New TV is better option because picture tube of KV-34XBR960 would not be available any more. Thanks.
×