Chasis intrded fetal error system halted problem plz hep me

fetal is a very serious error for mother boards

first change your ram

and check it that fetal error is solved if not then
replace your processor if not till.
so its mean you have fetal error in mother board. and try to replace it with another board
because if you want to repear it it will not work properly

enter the BIOS and turn of the chasis intrusion warning.

Please Check your motherboard in your motherboard having problem that why its happen please repair motheboard. or Change Motherboard.

Can you access the bios? You should disable Chassis intrusion, I don't really see anyone needing it if it's just a home pc.

You will need access to another computer and go to: http://www.asus.com/, choose you country, then "Download", the on the next page, "Download" again. Select you "Product, Series and Model". Motherboard, Socket 478, P4P800-SE click "Search". Then choose you operating system. You will get to the page where you can download the latest BIOS, and install program. Read how to upgrade your BIOS and follow the directions carefully.

I suggest you also change the CMOS battery before you upgrade to make sure a dead battery is not the cause for the CMOS corruption.

Dear friend Go there http://support.asus.com/download/download.aspx?SLanguage=en-us
You may see top the left corner Search by model please put the model number here
your model is P4P800 SE Then click the search button.. you may put your operating system then you find all for download thanks.

If it helpfull please rate me (sumon)

Turn the burn rate down.If that does not solve the problem.reinstall the burn program.
Was this solution helpful? Show your Appreciation by rating it..RICHARDM69

Could be that your ram is either Bad or the wrong type. I just had a similar problem. I changed the ram and up it came.

somewhere on the motherboard there should be a switch or jumper to turn it off look for directions either on case somewhere or on motherboard

First off take out your pc ram, then listen for a alarm to beep continually. If it does not beep then either your mobo is not getting power or it overheats for some reason and the protection functionalities in the bios has been set to switch off or it is broken.

Basically strip down your pc to bare essentials to get it working. Only hook up one ide/sata drive your os drive, one cd/dvd rom, powersupply to mobo and cpu and ram offcoarse. Start from bottom and work your way up.