What size bracket do i need to mount the rlt32ag20

check with auto parts store /auto salvage yard or dealer

TECHWOOD 50inches TV Wall Mount Bracket TV BRACKETS TV WALL BRACKETS...

You need to get a proper bracket for the TV. Some TV units use a vesa mount but the Techwood uses a much larger mount. If you look in the manual for the TV, it will call out the bracket size in mm. You can order and go from there. Fairly simply process.

Semper Fi,
Z

Hi. You'd usually use a VESA mounting bracket that suits the size of the mounting holes on the TV.

Which TV model is it?

Flat Display Mounting Interface

Dear Billy,
It is very difficult to determine what size screw for the TV bracket.

• If you bought a wall bracket, it will definitely have different sizes of screws in it.
• Follow the installation guide for what Size screw to use on the TV. It varies by manufacturers.
• Get a Universal Bracket.

Good Luck!
JP

If you are talking about the mounting screws that go into the back of the television to mount a VESA sized wall bracket, then it's most likely 5mm screws. The length of the screws could differ, depending on the bracket you are attaching, but usually 12mm or 16mm can be used. just make sure that the screws are long enough to thread into the TV completely, but not too long, or they may damage internal components.

If you are talking about the Lag screws needed to mount the bracket to the wall, then use 3/8" width lag screws 2 1/2" to 3 1/2" long, depending on how deep you have to go before hitting the wood stud.

You can wall mount your Proview TV with any standard VESA mounting system that is certified for up to the size of you tv.

There is no single answer that I can give you because it will vary due to material you are mounting to. If you are going to be mounting on ceramic tile or fiberglass shower wall I would recommend you use the plastic anchors that come with the bracket and mounting screws. Use drill size 3/16 drill holes and insert anchors. Mount bracket and screw in place. If you have hollow wall with nothing but sheetrock to hold the bracket I would get small butterfly anchors from hardware store and drill hole slightly larger than the wings on fastener when they are folded back along side the screws.If you have a wood backer board behind shower wall then drill holes with 1/8 inch bit and use screws long enough to reach through shower wall and sheet rock and mount bracket. Hope this helps you. Thanks P.S. If you have to drill thru ceramic tile you will need a carbide tipped bit.

The size is M8 x 25mm pitch 1.00. I just bought four of them at Ace Hardware for $.59 apiece.

Metric M5 or M6, when you buy wall mounting bracket, it will came with a bag of screws for attaching the TV to the bracket. All my wall mounting brackets for my TV come with screw.

http://s807.photobucket.com/home/budm/allalbums

The bolts that hold the wall mount bracket to the TV vary in size depending on the manufacturer of the tv you have.

The best thing to do is to purchase a wall mount bracket specifically made for your TV.

It may be possible that your owners manual will list the size of the bolts you will need.