Ventilate Problem My Machine starts up normal, when i push which coffee i want it starts as normal then says ventilate when i do it shows hot water then goes back to the selct product screen

you have to change the water flow.It is gone.You need new one

You can turn the water knob and let it pour out some hot water from steam wand. If your machine does not have any problem with scale the the masage ventilate will go away and work normal again.
Good luck tahnks for voding

You need to push the hot water button on the machines panel to allow water to run out of the steam wand. After a few seconds the machines ventilate message should clear.

You need to push the hot water button on the machines panel to allow water to run out of the steam wand. After a few seconds the machines ventilate message should clear.

You need to push the hot water button on the machine panel to allow water to run out of the steam wand. After a few seconds the machines ventilate message should clear.

Press the hot water button and allow water to flow from the steam arm until ventilate disappears and warming up appears on the display.
Ventilate after descale is normal.

Hi
There is a water button you need to push. It has a water drop on it. This will clear the ventilate message.

Open the steam valve when the hot water words appear above the ventilate

When it says to ventilate, it is asking you to prime the pump. Put a cup under the panarello wand ( the steamer/frother) to catch the discharged water and press the hot water button (upper left button on my machine). Wait until air stops coming out with the water, usually 3-5 ounces, and then press the hot water button again.

You machine is now ventilated (primed) and should be ready to go.

When it says to ventilate, it is asking you to prime the pump. Put acup under the panarello wand ( the steamer/frother) to catch thedischarged water and press the hot water button (upper left button onmy machine). Wait until air stops coming out with the water, usually3-5 ounces, and then press the hot water button again.

You machine is now ventilated (primed) and should be ready to go.