Ikea Whirlpool integrated dishwasher door front

http://www.doityourself.com/scat/dishwasher

This model comes with two types of doors. One with a single panel with integrated control on top or a two part door with control unit in front. The handle varies.

If you have a single door panel with handle bar across from right to left then you need to carefully unscrew the back panel screws and free up the front panel. the handle is screwed to the front panel from inside. Once you tighten carefully put the back door panel in and tighten. Take photos along the way to make sure you get back where you started. Also unplug dishwasher before working on it.

If you have a two part door with front control then handle and access to it is different. See diagram on this website for blow up of the panel and location of handle (part 713).

ESCUTCHEON DOOR ASSEMBLY Diagram Parts List for Model GLD5868V15SS GE...

You can magnify the image or take a full screen view for clarity.

yes you are probably correct, it may still have a warranty on the circut board if it's only a couple of years old. One thing you can look for is dirt in the door lock, sometimes it can be cleaned out, the machine will not start if it thinks the door is still open, check the contacts in the door lock, hope this helps.

http://www.ikea.com/ms/en_GB/customer_service/appliance_guide.html

hmmmm...the first thing that comes to mind is to check out ApplianceArt.com. they have alot of panel options. I'm not sure if they have the integrated ones you are looking for but they have cheap options for everything else.

DWF 415 Ikea Whirlpool Dishwasher has constant green blinking light. Drain pump works ok (as it will pump out a jug of water if I tip it into it!) but no water comes in. Cycle stops about 30 seconds after thre is no more water to pump. Any ideas on how to fix?

Please reply your exact model number so we can see what the door looks like.

Model numbers that are worn or missing are hard to find. When you go to whirlpool's website you might find your dishwasher there, other wise it might not have them listed because it is obsolete.

One place to look is on the panel below your dishwasher door. In some cases it is stuck there, or somewhere else under the dishwasher.
I have seen them inside of the dishwasher housing (under the cabinet between cabinet and dishwasher.

Very rarely will you find the model numbers inside of the dishwasher doors. However according to Whirlpool, if you open your door, you will find a sticker or a riveted plate on the right hand side of the dishwasher's frame, near the seals.

One thing I suggest however once you have discovered the model number, write it down and put it someplace safe.

Good luck

I agree read "broken door catch" solution and be particularly careful in respect of the edges of the stailess steel panels - some of the edges are hidden and they are very sharp.