Computers & Internet Logo

Related Topics:

Question about Dell Latitude Cp, Cpi, Cpx, C600, C800, Inspiron 3800 8000 4000 601212 CD-ROM Drive

2 Answers

How to change the mother board bios setting to default setting

Posted by kenaw admassu on

Ad

2 Answers

AYURVEDICC MEDICINE MANUFACTURING

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 245 Answers

Start your computer, continously pressong, f2 and del key, go to bios set up,, set default settings, save it, then restart your computer, by pressing ctrl+alt+del

Posted on Jan 03, 2010

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 23 Answers

Please press F6 button and enter "Y". then press F7 button and enter "Y". Then save and exit

Posted on Jan 03, 2010

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to save BIOS and change mother board CR2032 Lithium battery

if you only take 5 to 20 sec you might not lose any bios Cmos settings
im not sure what or why you want to save the settings for

once the Cmos battery has been removed for more than 30 - 60 sec your cmos settings will be restored which means no password and failsafe defaults
you could just restore failsafe or optimised defaults if you lose any Cmos settings
you will need to reset the password and the time and date


Restart your computer
During the boot process you will see on the screen to press a certain key to enter setup

Press and hold that key during the boot up process to enter BIOS using the arrow keys load failsafe defaults or load optimized defaults press escape then press f10 to save to cmos to restart

hope this helps you
1helpful
1answer

How to restore bios system without any input devices?

open your bios setup up. select restore defaults and save your setting.. this would be very helpful... most bios have there default setting backup.. this should resolve your problem..
1helpful
1answer

I have intel chipset mohterbord. i press start button.the smps fan running but mother bord led is not glow. no signal are find monitor pls help me.

Hello,
Please remove the CMOS battery.Hold the power switch and fit the cmos battery . And go to set up BIOS,and set the bios fail save default.
Follow link.http://www.pcbuyerbeware.co.uk/BIOS.htm

If the problem is same Change the DDR1 RAM from ram slot from any running pc or new if you have a spare.
If the problem is same
OPEN the BIOS chip using any thin pin and fit again tightly.
Follow link http://dexplor.com/phpBB2/viewtopic.php?t=7747553
shibuda_27.jpg
You can change the SMPS or use it in another pc for test ,again the problem is same please change the MOTHER BOARD.
REGARD's
SHIBUDA
0helpful
2answers

I have a message manufacturing mode:level (67)

Do the following with nothing attached other then the AC Power. After trying these fixes and neither works, it is a mother board issue. Replace the mother board.


1. Enter System Setup (aka BIOS) reset it to its default settings. By doing the following:
0helpful
1answer

Bios date is not being saved

it has to be the battery contacts, the motherboard is loosing contact with the battery which is why it keeps resetting itself
0helpful
1answer

1. On board display card is not working 2. When we attach external vga card display is working but no BIOS image in mother board and it gives an error that BIOS image is scan. 3.Key board is not working.

who makes the mother board and what bios is it using? can u access the bios at boot up? if so, is the integrated video option on? have you checked for upgrades / updates for the bios ? if you can access the bios, remove all non integrated devices from the mother board, select the option for "default settings" save and exit. then restart. after assuring the keyboard is plugged in the correct port. it should be color coded.
1helpful
1answer

Intel D865GLC Mother Board which wont save changes to BIOS

Hi Hans

Try to restore the bios to factory defaults.
then restart the Computer and then change your settings again and see if it works then
0helpful
1answer

I have an asus a7n8x-la mother board. It ran fine except the cpu cooling fan would speed up and the cpu heat sinc was very warm as compared to others. Finally it would not boot or go to post with the beep....

First of all set the BIOS default.
i think somebody change your Bios settings like-- over clocking or speeding fan etc etc.
add comment for further assistance.
Good Luck!

neo
Not finding what you are looking for?

180 views

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Clive
Clive

Level 3 Expert

4362 Answers

Brad Brown

Level 3 Expert

19166 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1198 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...