WinXP pro SP2. Trying to install HP 5550. USB connection. I have followed every last instruction during the setup. A balloon by the clock says "found new hardware, HP 5550". When I click the "x" to close balloon (won't go away by itself) the add new hardware wizard pops up and says the hardware won't install. The only option is to click "finish". When I do the cycle repeats itself until I unplug the usb cable. The printer is installed, works fine with applications and test pages, I just cannot get this vicious circle to stop
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
HP Deskjet 2600 Printer USB Setup is one of the easiest methods to connect the printer and system. This procedure is compatible with both Windows and Mac operating systems. Follow the steps below to start the connection process.
123 HP Deskjet 2600 USB Setup
USB Setup is one of the easiest methods to connect the printer and system. This procedure is compatible with both Windows and Mac operating systems. Follow the steps below to start the connection process.
HP 2600 USB Setup for Windows
STEP 1: BEFORE PRINTER SETUP
Examine if the printer is turned on and is in a ready state. Check if the USB cable is present in the printer's shipment box.
Connect one end of the cable to the printer's USB port and the other end to the system's port. Do not connect the cable during driver installation.
Wait till the printer's name displays on the list of available devices. Select the name to start the process. If the name is not displayed, move to the next step.
STEP 2: INSTALL THE DRIVER
If the driver is not installed in the system, the issue occurs. In such cases, try to download and install the driver.
Locate the compatible driver for your printer model on this website. Select the best driver and then click the Download option.
After completing the 123 HP Deskjet 2600 Setup driver process, follow the instructions mentioned on the screen. Select the connection type as USB.
Choose the Custom option to avoid the download of unnecessary downloads and click Finish to complete the process. for more Visit https://goo.gl/KoXrvJ
This because you dont have AHCI drivers required for Win XP and you set in BIOS either sata controller or ide controller to an AHCI. You must set to native IDE or anything else like that. If you wish set an AHCI driver you must press F6 during starting windows XP setup. And put the drivers (get it here) to floppy disk, it will prompted to install required drivers.. Another way to install driver without floppy disk you must inject the driver to windows XP installation CD...
P.S : you cant put the drivers onto floppy, because it wont be read by Windows XP setup..
Disconnect the Camera from the USB port and reinstall the CD or Downloaded software program.
When the program asks you to connect the camera to the USB port, do so and it should work.
Then to use it on the Web, do this. Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.
finally i solve this problem hp colorlaserjet 5550 error 59.30 same with an error 59.40 ERROR this is occurred with the fuser motor during startup or not rotating. take the left cover off and replace the motor. hope this will help.
okay you might want to write this down make sure you have your product key #
into cd drive then restart press F7 during restart then choose option start with cd or cd/dvd whichever you have
then press enter follow instructions YOU DO NOT want to press F6 for third party or raid let system go past that
then when asked to setup on the chosen space CLICK TO DELETE partition ( or unpartion ) then enter will ask to confirm
once all confirmed your installation will start
let me know how it goes MAKE SURE YOU READ ALL THE INSTRUCTIONS THE SYSTEM WILL GIVE
Hi, I would suggest you update your printer drivers with fresh drivers, try this, follow instructions exactly as written:
Create a new folder on your desktop and name it newhpdrivers(substitute your manufacturer in new name). Un-intall printer and printer software completely. Go to manufacturers website and navigate to their drivers/downloads or support menu. Select your model, choose the relevant software and download to the new folder you created on your desktop(watch for the light yellow bar at the top of window viewing pane, click on this and choose – download file - . Power down your computer. Reconnect the printer to the computer and turn printer on. Power on pc. Windows will detect new hardware and ask if you have the manufacturers install cd or a location to check for install files. Direct the wizard to your new software, follow the rest of the setup instructions and your done.
Rate Me Please! Hate it? Rate it…Like it, try it! Thank you for submitting your question to FixYa.com Would you please take a moment and show your appreciation by rating my performance. All ratings and comments are welcome. Thank you - anaanymous