I have a new Kodak EasyShare 5100 that will not print. I have installed new firmware, installed the software from both the website and the CD, and used the Kodak clear install utility with no luck. I get the "spooling" status window and the on/off light blinks as if it's going to print. After about 30 seconds I get a "printer not responding" window and the light stops blinking. This process will repeat on its own until I cancel the print.
I am running Windows XP Pro SP2. I have tried different cables with no luck. I have also tried other printers in the same USB port and they work fine.
Furthermore I have successfully installed the printer on my notebook computer and it worked flawlessly. There is obviously something with the software on my desktop that is hindering the printer.
375 views
Usually answered in minutes!
Ive only done has the direction have asked, installed cd went from there
can not download drivers.printer said no connecton
My problem is that my 5100 will not print pdf files - although it did once! It just sticks at the spooling stage, It will print Eudora e-mails and Word documents well. I am using the Foxit pdf Reader 2.0. I will install Adobe and see if that solves the problem.
Richard
About once a week I get an error message that the printer is not responding. Then I delete the installation and reinstall the printer. After I do that the printer will work again for about a week.
There is obviously something wrong with the Kodak software.
[email protected]
will not print
new easyhare 5100 will print from printer,but not from computer.just shows PRINTER NOT RESPONDING
×