Samsung HC-P4241W 42" Rear Projection HDTV-Ready Television Logo

Related Topics:

Question about Samsung HC-P4241W 42" Rear Projection HDTV-Ready Television

2 Answers

Samsung HCP4363WX/XAA I have a convergence problem with my TV. what i wanted to know is how to get to the covergance board. I have been told that i need to replace the whole board. I dont really know anything about this stuff so any help would be greatful. also i would like to know what the part number for this would be so i can order a new one. Thanks

Posted by cewilbur on

  • gardhjo Dec 31, 2008

    i just lookked up the part @samsung parts .... & it's



    BP59-00045A
    MODULE-FOCUS PACK ***'Y


    ... can anyone confirm this is right?... i'm not a tech guy ... but it looks like this is it...

×

2 Answers

Anonymous

PCP board bp94-01794a

Posted on May 01, 2008

  • Graeme Wall
    Graeme Wall Nov 30, 2013

    Can anyone help me? For some reason the input components except TV cannot be excepted by the cable box...of course I've done all the usual things like check out connection and such...this happened when I was updating the TV settings via cable box...I must have touched something but I can't get back to those settins unless I can connect through a component...kind of a catch 22...I'm missing something simple to do but I can't think of it..

×

Anonymous

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Samsung Master
  • 5,138 Answers

Was wondering if you got set fixed yet? STK-392-180s are the ics I use when repairing convergence.Replace both chips.

Posted on Mar 31, 2008

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Samsung hcn4226wx/xaa red color out of focus

Ok first of all, the convergence board you are looking for is no longer available from Samsung, probably because of the large failure these boards are having. The only thing to do though would be to replace the convergence amp IC's on the convergence amp board. this will involve locating the convergence amp board, going to http://www.samsungparts.com, entering your model number, without the /xaa prefix. Locating the list of parts for this TV set, and getting the right convergence amp IC's for this TV set. The numbers for the convergence amps are STK-392-040. You will also need to get the service manual for this TV set to perform touchup convergence, as well as to realighn the magic focus into the memory of this TV set. If you have the ability to solder and unsolder, you should have no problem replacing thes convergence amp IC's. But i will have to say this, about 45% of these TV sets do still have a problem after the convergence IC's are replaced. this is usually due to the burnt ground return resustors on the convergence board, so be perpared to know how to read a scematic diagram in the service manual and to trouble shoot the board. There is no simple repair to this problem I'm afraid, with this Samsung TV set. But , if at any time, you feel lost in the repair of this set, do not continue, and call out a pro to assist you in the repair of this TV set. Good Luck with the repair of this TV set.
0helpful
1answer

Have a orange tint over tv screen

Tv have a problems known as a convergence problems,it dead.Tv have colors lines R,G,B mis alignmemts,have colors shadows pictures or 3D pictures look alike?The tv convergence board have dead 2 STK convergence ICS and some or all of it resistors too.These parts must be replaced on the tv convergence board to solved tv convergence picture problems.Try website like Tvrepairworld.com,might can still buy a whole refurbish convergence board for the replacement.The DLP TVS Akai and Samsung used the same covergence board for the replacement.Or the shop,will cost u like $300-350 for parts and labors.
0helpful
1answer

I have a samsung HCP4363wx/xaa rear projection tv, and everything on all chanels looks like its always in 3-D, text is unreadable, any ideas what might b wrong ??

Projection TV sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the video to look normal. When its out of alignment the video will look 3D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the TV menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired.
This is a very common failure on these projection sets and a fairly simple DIY fix. All projection sets including Samsung, RCA, Sony, Philip Magnavox, Panasonic, Pioneer, Akai, GE, JVC, Toshiba, and others at some point will have the same problem.
You can get a repair kit with parts and instructions from www.TvRepairKits.com
0helpful
1answer

We have 52 inche akai and it shows double inmage

This problems is known as a convergnce problems,it dead.The tv convergence board the 2 STK convergence ICS and some or all it resistors are dead.These parts on the tv convergnce board,must be replaced to solved the tv covergence board.To solved the tv picture convergence problems.Try website like Tvrepairworld.com to buy a whole rebuild convergence board to replaced.The Akai/Samsung tv used the same convergence board.
1helpful
1answer

Won't stay in focus? keeps getting red out of focus.b

Tv have a problems known as a convergence problems,it dead.Any colors lines R,G,B mis alignment.The tv convergence board the 2 STK convergence ICS and some or all it resistors are dead.These parts must be replaced to solved the covergence problems.Try website like Tvrepairworld.com to buy a whole refurbish convergence board for the replacement.The Samsung/Akai tvs used the same convergence board.Or the shop will cost u $300-350 for parts and labors.
1helpful
1answer

Samsung PCL545R 54 in. Rear Projection Television

Ur tv have a problems known as a convergence problems,it dead.The tv covergence board must have it 2 STK Convergence ICS and some or all resistors be rreplaced to solved the convergence problems.The shop will cost u $300-350 for parts and labors.
1helpful
1answer

Samsung tv model # HCP4363WX Ghosting

The convergence board that you replaced will not correct the issue that your describing as your model has the convergence amp circuits located on the Deflection board. You would need the deflection board which is available at the following link. It also has a picture of the board which is in your model its the large board on the right with the Flyback and both Convergence ICs on it.
http://servicemanuals.vstore.ca/product_info.php/pName/p59a-pwr-def-board/cName/samsung-parts
0helpful
1answer

PCL5415R conv. board problem. Having trouble finding part number. I have the manual Samsung

I'll take a look if you want to forward them to me:
[email protected]
This convergence board problem seems to be very common and if they are not too model specific (firmware embedded) there may be service companies repairing them. I don't; haven't done a whole lot of service for years partially due to the difficulty of trying to pry stuff out of the hands (or shelves) of Asia. 
0helpful
1answer

Samsung LCD TV HCP4363WX/XAA Black screen no sound.

check out the link below ... sounds like a similar problem:
http://www.dslreports.com/forum/r20889230-Samsung-LCD-TV-No-Picture-but-has-Sound
Not finding what you are looking for?

Open Questions:

831 views

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76851 Answers

 Grubhead
Grubhead

Level 3 Expert

5750 Answers

Cindy Wells

Level 3 Expert

6611 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...