With the JVC D-series TV do you need a Remote Control to turn on the input screen?

Remote Control Codes For JVC TVs

• JVC 3 Digit HDTV Remote Codes. 065. 067. 089. 013. 054. 055. 060.
• JVC 4 Digit HDTV Remote Codes. 1227. 1130. 1131.
• JVC 4 Digit TV Remote Codes. 1080. 1092. 1117. 1131. 1235. 1288. 1299. ...
• JVC 4 Digit DVD Remote Codes. 2097. 2115. 2166. 2204. 2206. 2017. 2028. ...
• JVC 4 Digit VCR Remote Codes. 3060. 3067. 3118. 3121. 3122. 3123.

Remote Control Codes For JVC TVs

..

Have you looked on eBay or amazon or etsy?

Do you mean 'unlock" or just turn it on? There should be a series of buttons on the TV itself that allow you to turn on, choose input, volume, etc. Your JVC tv manual should explain the buttons. You may also want to buy a "universal" remote control and program it to the TV if you have lost the original remote.

JVC TV SCREEN OFF ,LIGHT ON,TIMER LIGHT BLINKING, NEED HELP URGENTLY PLEASE.

Most JVC TV's with HDMI and Digital Input have an optical sensor inside the case to sense if someone is trying to bypass the hardware encryption. My JVC was exposed to sunlight prolonged sunlight and triggered this optical sensor which disabled my HDMI ports. This may be the same situation for you.

JVC HDMI Port Fix

Turn the TV on, and enter the Service Menu. Select 2 for Self Check. Then turn the TV off, and after the fan turns off, unplug the power cord. Reconnect the power cord, turn the TV on, and the HDMI port is re-enabled.


Here's how to get to Service Menu:

Before entering the SERVICE MENU, confirm that the setting
of TV/CATV SW of the REMOTE CONTROL UNIT is at the
"TV" side and the setting of VCR/DVD SW of the REMOTE
CONTROL UNIT is at the "VCR" side. If the switches have not
been properly set, you cannot enter the SERVICE MENU.
1) Press [SLEEP TIMER] key and while the indication of
SLEEP TIMER 0 MIN is being displayed, press
[DISPLAY] key and [VIDEO STATUS] key (Fig.2)
simultaneously.
2) The SERVICE MENU screen of Fig.1 is displayed.
3) Verify what to set in the SERVICE MENU, and set
whatever is necessary (Fig.1).
Refer to the SERVICE ADJUSTMENT for setting.
4) Press the [BACK] key to return the SERVICE MENU.

It sounds like you have bad solder connections in the Vertical circuit or the horizontal circuit. The Vertical IC may need to be replaced if resoldering does not help.
You will need to call a good TV Tech for this repair.

If you want to get the original remote for this model (AV-30W776), you can find it at this JVC parts ditrubutor:

JVC AV-30W776 Replacement Part Remote Control

I hooked up a Pioneer DVD player to my TV and when I play a DVD the volume cannot be controlled by the TV. It just plays at one level and on the louder side. When I'm watching regular TV and the DVD player is on and playing a disc I start to hear the DVD soundtrack at the same time as the whatever I'm watching on TV. I should not be able to hear anything until I switch over to Video 1. Any suggestions?

I found one and bought it. Thanks

My JVC AV-32FA44 wont turn on. the on timer light blinks. When i unplug it and plug it back in i get beeping (i stoped counting at 50 beeps) then it stops and the light just blinks.