At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Replacement part I recently purchased a Maverick pasta maker on ebay. The left knob that is the left knob on the front. the one that holds the die in place. (Or at least it holds the metal plate which holds the die in place). Is loose and needs to be replaced. The Knob Part #6468-004 Machine Model #MPM6468 . Do you know where I can get a replacement?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
To add the pulse button to your Robot Coupe R101, you will need to purchase the R101 Plus switch and front panel. The replacement is relatively simple and can be done by following these steps:
Turn off and unplug the Robot Coupe R101.
Remove the screws that hold the top cover in place and lift off the cover.
Locate the control panel on the front of the machine and remove the screws that hold it in place.
Carefully remove the control panel and disconnect the wires from the old switch.
Install the new R101 Plus switch onto the control panel and connect the wires.
Replace the control panel onto the front of the machine and secure it in place with the screws.
Replace the top cover and secure it in place with the screws.
Once the new switch and front panel are installed, you will have the pulse button on your Robot Coupe R101.
The purpose of this washer is to reduce the friction between the auger and the body of the grinder head. During the grinding process the auger is pushing food/meat forward to the disc and respectively reacting itsef backward. So, the washer goes over the back shaft of the auger as a surface of the contact with the body. You have to put it over this shaft before assembing the auger with the head body. The pasta maker attachment and the grinder both have identical augers.
The number I have is no longer in service.
×