Question about Yamata FY101-1A

Brother se- 2700 sewing/embroidery machine Comment by Loves2sew, posted on Jan 30, 2008 when pushing the thread cartridge in a piece snapped off the inside and I need a diagram to see where is belongs. It is the metal piece that comes down in front of the needle when you push the cartidge down. I have not even had this machine a year yet..only 10 months. I live in small town and no repair shops around.

1 Answer

porschegl

Level 1:

An expert who has achieved level 1.

Mayor:

An expert whose answer got voted for 2 times.
Contributor
1 Answer

Brother se-2700 sewing/embroidery machine. My automatic thread cutter is getting very dull and won't cut any more. Can it be replaced? Where do I get a replacement?
Thanks porschegl

Posted on Jun 04, 2008

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0 Answers

I need an instruction book for my BROTHER SE-2700 sewing & embroidery

Jun 02, 2016 | Brother Sewing Machines

2 Answers

Brother se 2700 will not sew on knit fabric

Check that you are using a ballpoint needle, designed for knits. Also, be sure that the thread is not 100% cotton thread.

Jul 15, 2014 | Brother SE-270D Computerized Sewing...

2 Answers

Brother embroidery machine broken

make sure the bobbin thread is wound and installed correctly
remove tangled thread and clean lint out from under feed plate
clean and remove shuttle to clean out area with lint brush
inspect bobbin for burs and scratches...make sure when reinstalling shuttle and bobbin that it rotates freely
hope this helps

Feb 04, 2010 | Brother SE-270D Computerized Sewing...

1 Answer

I need a replacement needle to embroidery. need to know the model#. I have a Brother SE-270D Easy Thread Cassette System.

The thread cassette has no bearing on what needle you use. You need a Schmetz embroidery needle with the red band size 75 for light to medium weight fabrics or a size 90 for heavier fabrics such as denim.

Dec 07, 2009 | Brother SE-270D Computerized Sewing...

1 Answer

Problem with Brother Quattro

This is an Embroidery machine. Use a thicker thread if only sewing. If doing embroidery, check your hoop for proper size, and make it tight holding the material.

Jan 03, 2018 | Brother SE-270D Computerized Sewing...

2 Answers

My Disney Brother SE-27OD Embroidery Sewing Machine/trouble

Make sure that your needle is put in the correct way, there is a groove in the front of the needle, check with your finger nail, this is usually to be facing you, and make sure the thread is going through the tension holder correctly do not have the foot down when you are threading the machine,as this stops the thread from going through the needle tension holder.

Sep 09, 2008 | Brother LS-2125 Mechanical Sewing Machine

1 Answer

My Brother 270D Starts out embroidery pattern fine then quickley starts making big loops on understide leading to thread jamming in bobbin. Removal is difficult and usually results in ruining embroidery...

Yes I fixed it and for $14.99 I'll share the solution with you

Jul 26, 2008 | Brother SE-270D Computerized Sewing...

2 Answers

Brother Sewing & Embroidery SE-2700

How do you retime a machine? My machine will miss stitches ot completely break the thread. The top thread misses a lot of stitches.

Feb 22, 2008 | Yamata FY101-1A

1 Answer

Brother se 270d sewing machine

The auto threader attachment has fallen off.

Nov 24, 2007 | Yamata FY101-1A

6 Answers

Brother SE-270D Jams below needle plate

Comment by margecam52, posted on Aug 12, 2008 It's the bobbin thread. Also, it does not have to be Brother brand. Any 60wt thread will work. I get mine at http://www.threadart.com
They have it on large cones, and I use a cone holder to fill my bobbins. I have not had a single problem since. I like this thread because it has a sheen to it. I also have a longarm quilting machine & I use this bobbin thread 95% of the time. Also, be sure to check the bobbin area (remove the plastic & the metal plates) for lint buildup... I have a small, soft artists paint brush that I use to remove the lint build up with. I check after every embroidery run.
And for the thread not coming through...mine does it when I change thickness of threads. There is an adjustment wheel on the front of the machine, I turn that...seems to make the difference...not even sure that is what it's for...but it works for me.

Oct 12, 2007 | Brother SE-270D Computerized Sewing...