We have a Huswana snowblower and the auger does

To fix this issue, firstly engage the mower's bypass lever properly. Replace the missing parts - the axle key or the idler arm spring. Then, check the drive belt. It should not neither be slipping over the pulleys nor be cracked. With this, check the condition and lubrication of the tensioner pulleys.

You can try engaging and dis-engaging the bobbin winder and turning the machine off and on to see if it will reset.

sounds like a slack or broken drive belt $5 or 6 for a replacement

my husq. snow blower when I put in gear it takes off like a rocket ship how do I get to slow down

Hi, On most of these newer machines they have a clutch that you engage to fill the bobins.
Please make sure that the clutch is disengaged for normal use. If this is all OK see that belt
is attached on motor.

Check the bobbin area to make sure the needle is not catching on something with the bobbin unit. Take the bobbin case out and see if it runs. It may be the belt but that's inside. Usually if the belt is off, the handwheel will turn easily but the needle will not go up and down. Suggest service by local authorized husqvarna viking dealer. You can find the nearest dealer from the husqvarna viking website and click on "Dealers" link. http://www.husqvarnaviking.com

An authorized husqvarna viking dealer can order you a replacement belt and install it for you. To install the belt, the covers have to be removed and there are lots of hidden screws. 3rd party parts are available from various resellers online. Just Goggle Search or try ebay but you still have the problem of installing it. Suggest you take it to a local authorized Husqvarna Viking dealer for them to order the original part (if they don't have one on hand). You can find your nearest authorized dealer by clicking on the "Dealer's" link at their website - http://www.husqvarnaviking.com

Make sure the bobbin winder isnt engaged this can cause the clutch to engage and the motor will run but the machine wont sew

Doesn't sound good. If bobbin is in correctly, recommend taking machine to an authorized Husqvarna Viking dealer for service or have them send to Husqvarna Viking (SVP) Service Technical Department for them to repair. A list of authorized Husqvarna Viking dealers can be found at their website - http://www.husqvarnaviking.com/us

Good luck.

Either the feed drop is engaged or it may not be releasing due to being stuck because of an oiling issue. Let me know if you've checked this as I have one around to reference as well.