My computer is locking up on the guest page when u click on the name u want it goes in and rite back 2 the guest page

is this a home lock or hotel.
lost the manual for the system? did you
no makers name of lock and model number told
is it 1 door key lock or part of a system of locks. not told
my guess is your tech that installed this tuned off guess.

when posting about locks in computer form, know that we can not guess 1000 of locks system used world wide for decades
I say get the manual and read it, from the maker for the lock
or call a lock smith, and see him do the same thing;.

Not sure if this will work without some user's account being open, but try starting Task Manager. Press Ctrl/Alt/Delete. Press all 3 keys at the sme time. There should be a "reset password" option. But again, I don't know if you can do this unless a user is already signed in. If it doesn't work, the computer should have a "public" or "guest" account. When it wants your password, look for "change users". Click on that and select he guest, or public, or whatever it is labelled, account, and you'll be in the computer, but not in your owner's account. And if you try the task manager/change password from the guest account it may not let you do anything with your owner's account. If all else fails, call HP at 800-474-6836.

Hi Norman,
For guest access:
You can allow guests to use your Internet connection without joining your personal network.
.
The network name and password for the guest network is located on the network information card found under the foot of your Router
.
A person using your guest network will be able to join without a password, but will be shown a login page when they attempt to surf the Web..
They will need to enter the guest password into this page to continue.
Hope this helps!
Please Rate if it did!
Thanks,
Gary

Linksys E series routers can broadcast 2 wireless networks. First one is the main wireless network which is secured wireless network.
The second network is a guest network which will always show you unsecured.
It will never show you secured and you can not make it secured.
However it has a web based security.
Anyone can connect to the guest network but will not be able to access Internet without Guest access password.
In other words there is a security.
You can disable guest access also.
See more about Cisco Guest network access password

open your browser to 192.168.1.1
default login/pass is admin
go to wirelessgo to wireless security and apply a password to your guest network.

Windows has a built-in security system that requires a user to type in a password to get to his personal account.
Only an "Administrator" account holder can make software changes to the computer.
All other users, including Guest users, need the permission of an Administrator to make any system changes.
However, if you have a guest account and need to access the Administrator account to make changes, you can do so via the Command Prompt feature.
Log in to your Guest account in Windows.
Go to "Start" > "Search" and type in "windows/system32/cmd.exe" to find the Command Prompt feature.
When the file appears on the search menu, drag it to your desktop.
Leave the search window open.

Right-click the cmd.exe file on your desktop and choose "Rename."
Type "sethc.exe" for the new name and click on an empty area next to the file name to save the new name.
Right-click on the "sethc.exe" file and click on "Copy."
Go back to the open "windows/system32" folder and right-click anywhere in the folder.
Select "Paste" to put the "sethc.exe" file inside.
Choose "Yes" when asked if you want to overwrite the current file.
Go to "Start" > "Log Off." It will bring you back to the User Account menu.
Press the "Shift" key 5 times in a row.
The Command Prompt will open.
Type "net user administrator [password]" and insert a new password in the [password] section.
Press "Enter" to set your new password.
It will bring you back to the User Accounts menu.
Click on the Administrator User Account and type the password you just set to log in to the account.

on the bottom of your router is an ip address: usually, 192.168.1.1
enter this into the search bar of your computer.
the router settings page will come up. the user name is: admin
the password is: admin now you can set the guest password and, configure your router.

There are 2 types of lock i know

1) computer lock at dos asking for password to boot up
reset cmos will do the job

remove power plug and off all power

remove tower side cover

look for a 3 pin or 2 pin cmos jumper and short circuit it.

remove motherboard battery

wait like 5 minutes

fix everything back and your done

2) computer is asking for password at windows login screen

for this problem see if you can login to guest account

then go start
then run
type cmd
type net users [] *
enter the new password
enter the new password again

note
[] means the account name
the password you type will not apper on the screen .

You might get in using "Safe Mode" and going throught the Administrator account. If you have no password on that one (most people don't) then all you need to do is hit enter. If you have the same account listed on your Welcome page try it there first. If not Google password recovery. There are some free password recovery programs online that could help. Only other choice is to have your documents backed up by pulling the HDD then do a full recovery using the recovery partition or CD.

It seems that the Guest account profile is corrupted because of which you are unable to log in as like in previously.

In the Profile Login page, hold the Ctrl and Alt keys and press the Del key twice.

This will give you a window where you need to enter the User name and Password.

Enter the User name as administrator and leave the password column blank if you have not set any Password to the administrator account or enter the Administrator password if you have set any.

Now once you are loged into the Administrator account, create a new User from the Control Panel > User Accounts.

Set the required limitatios to the account like limited account or administrator account and log off from the administrator account.

Now, you should have the newly created user account available in the login page. Select it and you should be able to login.