How to get a driverfor pny 8 gb flas drive for

Windows XP, Vista , or Windows 7 should be able to automatically detect and install it. Try using it on another computer that has either Windows XP, Vista , or Windows 7 on it. If it doesn't automatically detect and install it on that one then the flashdrive is dead.

If you have an older operating system then go here to download the driver:
http://www3.pny.com/categories/usbflashdrives.aspx?category_id=12

Try connecting it some other computers.
If it does not work at all, spend $8 to replace it.
If it does work, then it's either the "hardware" on your computer, or the Vista "software" (wrong/missing USB device-drivers).

USB devices are incompartible with computer manufactured prior to the turn of the mellanium. USB devices became functional during the innovations of windows XP Vista and 7

Did you change the format from (default)fat32 to Windows file system on your drive?

Windows 98 has no support for newer USB flash-drives.

Windows XP has full support for newer USB flash-drives -- if it cannot find the driver on your 'C:' disk, it will access the Internet to download the drivers from Microsoft's web-site, automatically.

Hi

USB memory sticks do not need a driver, it comes with windows, unless you have a really old pc with windows 98 or similiar.

small sd cards have a small slider in the care itself. Flash drives may have partitions on the drive itself. One or two of these small partitions may have write protection on them that cannot be removed. If you have too much trouble, put the flash drive in a usb slot, wait for it to be recognized. Open the control panel and open administrative tools. Click on computer management and then in the left lower pane, click disc management. In the right pane, there will be a window that shows and lists all the drives and partitions. Look for your flash drive and you can delete volumes, partition the drive etc.

mail me at [email protected] i will send u drivers

Hmmm.. I am not sure where to find the drivers, or if the driver is a must. But if you have a driver file, then you can take it to any system and install it there.. Intenet connection is not at all required.

Try to use a new Computer having Windows Vista, Dual core, 2 Gb RAM, and at least 160 Gb Hardware.
Your problem is solved.

He! Ha Ha Haa Haaa!