Question about Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool washer doesn't unlock the door at the

Whirlpool duet washer doesn't unlock the door at the end of the cycle. I have to turn the power back on, then hit start, then hit cancel and that unlocks the door. Clothes in washer are still pretty wet, but washer seems to be spinning fine and no water is leaking. Help??

Posted by kdpev on

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 230 Answers

Hi There
I have found this for you to read. it's door unlock error. Hope this helpful and let me know how it goes.
F/dU Door Unlock Error
A Door Unlock Error occurs if the door cannot be unlocked. It will try to unlock the door 6 times before displaying the error.

  • Door Lock Mechanism broken.
  • Check Door Lock/Switch Assembly for foreign objects
  • Check Wire Harness connections to the Door Lock/Switch Assembly and Central Control Unit (CCU)
  • Door Lock/Switch Assembly Failure
Thank you for writing to fix ya.
Best Regards Richard

Posted on Dec 29, 2009

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

How-To Unlock The Controls For A Whirlpool Duet washer


I have unplugged the machine and plugged it back in and restarted, just like when a computer needs to be reset/cold boot.

Jul 03, 2015 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

How do I unlock a whirlpool duet washer


from a previous discussion:

Wait at least three minutes after the end of the cycle before attempting to unlock your Whirlpool washer. The door will not unlock until the motor speed equals 0 and 180 seconds have elapsed since the motor control unit received the "Stop" command. If the water in the washer is warmer than 122 degrees Fahrenheit or the water level is set higher than Wool, Delicate or Hand Wash, the washer must drain before the door latch will unlock 2 Hold down the "Control Lock" button on your Whirlpool washer for three seconds at the end of the washing cycle. Listen, and when you hear the unlatching sound, the door should open.3 If your Whirlpool washer did not unlock at the end of Step 1, press and hold the "End of Cycle" button for five seconds to manually reset your washing machine.4 Unplug your Whirlpool washer and leave it unplugged for 45 minutes. After 45 minutes, plug your washer back in. The washer's programming should be reset and the door should open.5 Manually unlock the door of your Whirlpool washing machine. Make sure to unplug the appliance before completing the manual unlock. Use a screwdriver to remove the metal strip, called the toe panel, at the bottom of the washing machine. Once you've removed the toe panel, reach up inside the front panel of the washer and feel around for the door latch. Locate the tear-drop shaped tab at the bottom of the door latch and pull it gently. When you hear a click, the door should open.

unlock-whirlpool-duet-washer-u40lsvyytnuesyuv3fbafhtd-3-0.jpg

Jan 04, 2015 | Whirlpool Washing Machines

1 Answer

Whirlpool Duet washer does not indicate end of cycle and unlock door


Most times this problem can be caused by a blocked tube to the pressure switch,..

Mar 03, 2014 | Whirlpool Washing Machines

1 Answer

Whirlpool duet washer door will not unlock or complete the cycle


Wait at least three minutes after the end of the cycle before attempting to unlock your Whirlpool washer. The door will not unlock until the motor speed equals 0 and 180 seconds have elapsed since the motor control unit received the "Stop" command. If the water in the washer is warmer than 122 degrees Fahrenheit or the water level is set higher than Wool, Delicate or Hand Wash, the washer must drain before the door latch will unlock 2 Hold down the "Control Lock" button on your Whirlpool washer for three seconds at the end of the washing cycle. Listen, and when you hear the unlatching sound, the door should open.3 If your Whirlpool washer did not unlock at the end of Step 1, press and hold the "End of Cycle" button for five seconds to manually reset your washing machine.4 Unplug your Whirlpool washer and leave it unplugged for 45 minutes. After 45 minutes, plug your washer back in. The washer's programming should be reset and the door should open.5 Manually unlock the door of your Whirlpool washing machine. Make sure to unplug the appliance before completing the manual unlock. Use a screwdriver to remove the metal strip, called the toe panel, at the bottom of the washing machine. Once you've removed the toe panel, reach up inside the front panel of the washer and feel around for the door latch. Locate the tear-drop shaped tab at the bottom of the door latch and pull it gently. When you hear a click, the door should open.
  • Oct 13, 2011 | Whirlpool Washing Machines

    1 Answer

    THE DISPLAY WINDOW SAYS CONTROL LOCK. WHAT DOES THIS MEAN?


    Press and hold the End of cycle button for 3 seconds or until the Control Locked indicator turns off. Click on the link below for more details if pressing and holding the said button doesn't unlock the controls.

    Unlocking the Controls on Whirlpool Duet Washers

    Jun 18, 2011 | Whirlpool Duet GHW9150P Front Load Washer

    2 Answers

    Duet ht washer control locked. How do I unlock it? Really need your help


    Hello & Welcome to FixYa


    This is a common issue with Whirlpool Duet washers however, your whirlpool duet washer can be reset to resolve the control lock problem. Press and hold the END OF CYCLE/CYCLE SIGNAL button for 15 seconds to reset the control. Please get back to me if you have any other questions.


    Kevin

    Apr 25, 2011 | Whirlpool Duet GHW9150P Front Load Washer

    2 Answers

    I have a Whirlpool Duet Sport (model #WFW8400TW03) that shuts down when I press start. There are no error codes and the last cycle ran with no issues. The door is shut and seems secure. I can find nothing...


    I had the same problem. My control lock was on without the status light on. To unlock the controls I Selected and held END OF CYCLE SIGNAL button for at least 3 seconds. The lock/unlock control status light never indicated the locked position, yet my washer now works. NOTE: Select and hold END OF CYCLE SIGNAL button for 3 seconds to toggle between lock and unlock.

    May 18, 2010 | Whirlpool Duet Sport HT WFW8400TE Washer

    1 Answer

    Whirlpool door lock error


    turn off all water to your washer run the washer empty for a full cycle when the cycle ends the door will release
    spray a lubricant such a WD40 into/onto the door lock
    the door kit will not fix the problem

    Jun 01, 2009 | Whirlpool Gold Duet GHW9400P 3.8 Cu. Ft....

    1 Answer

    Door will not unlock on my whirlpool washer wfw9200sqa


    Power must be on. Hold down the 'end of cycle' button at the right side of the panel for 3 seconds. Wait for 2 minutes then try the door.

    Mar 22, 2009 | Whirlpool WFW9200S Front Load Washer

    3 Answers

    Whirlpool duet washer


    Press and hold the end of cycle button for 3 seconds..

    Jul 10, 2008 | Whirlpool Duet GHW9150P Front Load Washer

    Not finding what you are looking for?
    Whirlpool Duet GHW9150P Front Load Washer Logo

    1,370 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Whirlpool Washing Machines Experts

    Marvin
    Marvin

    Level 3 Expert

    85239 Answers

    Michael Thomas
    Michael Thomas

    Level 3 Expert

    3056 Answers

    Brad Brown

    Level 3 Expert

    18564 Answers

    Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...