I have a siemens speedstream 4100 and im using it to connect my xbox to xbox live. it doesn't connect when i plug it in and i tested it and it fails the ip address test. its set to automatic and automatically inputs my ip address and subnet mask codes but it leaves the gateway address blank. what should i do, by the way im using a macintosh G5
TUrn on the computer with the speedstream 4100 connection, like you always would, then when on and fully booted, unplug ethernet from modem, plug in ethernet cord from xbox. Turn on X-box, then restore factory settings. Should work
Force the gateway on the xbox configuration... retrieve gate from command prompt of your pc depending on the os.
SOURCE: connecting to xbox live with a speedstream 4100
force the gateway on the xbox configuration... retrieve gate from command prompt of your pc depending on the os.
log into modem using 192.168.2.1 in your browser and go to modem utility through browser.
then select last option on left of utility screen on left and choose reset.
this will reset modem to factory settings.
then call microsoft support there is a toll free support number in yellowpages.ca. ask them to help you setup pppoe connection in the xbox. you can set the mtu setting there also to 1492 for dsl broadband and if on cable use 1500
835 views
Usually answered in minutes!
×