I cant set the clock on my pioneer p5000ub radio

Mosfet 50wx4 indicates a feature of the Pioneer car radio. It isn't a model number. One Pioneer car radio/CD player with this feature is the DEH-1500. On this model, you need to turn off the unit to set the clock. Press and hold the Source button (to the left of the preset tuning buttons) until the device turns off. Press Audio (upper right corner) repeatedly until the clock appears in the display. Use the arrow keys (Skip/Back or Left/Right) on the right hand side of the radio to select a segment of the time to adjust. Use the Up/Down arrows to set the current time. Repeat choosing the time segment and adjusting the time until both the hour and minutes are correct. Press Band or press and hold the Audio button to exit the clock setting mode.

ManualsLib has the manual for the Pioneer DEH-1500 here: https://www.manualslib.com/products/Pioneer-Deh-1500-Car-Cd-Player-Mosfet-50wx4-Super-Tuner-3-Am-Fm-Radio-3432555.html . See page 16 for the clock setting procedure: https://www.manualslib.com/manual/129844/Pioneer-Deh-1500.html?page=16#manual . See page 6 for the picture of the front-panel buttons for the DEH-1500.

I hope this helps. Please add a comment with the model of the car radio if the above procedure doesn't work for your unit.

Cindy Wells

Here is a link to the owner's manual for the stereo, it will tell you how to set the clock:
http://a248.e.akamai.net/pix.crutchfield.com/Manuals/130/130DEHP500.PDF

here is the link to your installation and user manuals:
http://www.pioneerelectronics.com/PUSA/Support/CarAudioVideo/In-Dash/CD-Players/ci.DEH-P5000UB.Support
wiring diag on 1-4 onder other manual

Cheers!

Usually, you need to have key on and radio off. press and hold function button till u see settings menu. Set radio stations by press and hold preset # while on station till beep or display blinks.

1 Use MULTI-CONTROL to select
CLOCK SET.
2 Press MULTI-CONTROL to display the
setting mode.
# Press BACK to return to the previous display.
3 Press MULTI-CONTROL to select the segment
of the clock display you wish to set.
Each time you press MULTI-CONTROL, one
segment of the clock display is selected.
Hour—Minute
As you select segments of the clock display,
the selected segment blinks.4 Turn MULTI-CONTROL to put a clock
right.
# You can also perform the same operations by
pushing MULTI-CONTROL up or down.

The solution that worked for me is:

1) turn off the radio.
2) Push and hold the power button down (the dial). DON'T release the button.
3) The unit will display the time on the lcd screen with the numbers flashing, (only hr or min).
4) use the up/dwn, right/left buttons to set the clock.
5) turn off the unit by pushing the power button (again, the dial).

That is it. the clock should be set.

Hope that helps,

To set the clock on the Panasonic DEH-1600 car stereo, follow these instructions:

1. Turn the radio off by pressing and holding the SRC button (under the label OFF).
2. Press and hold the Audio button in the upper right corner of the radio. After holding the button for about 3 seconds, the clock will begin to blink (the hours).
3. Use the up and down arrows to increase or decrease the time hours or minutes. Use the left and right buttons to toggle between setting the hours and/or minutes.
4. When done, push and hold the Audio button again fir about 3 seconds until the clock stops blinking (hours or minutes).

Hold source button till radio turns off and clock turns on. Hold Function till clock blinks. Press arrow keys to select direction of time. Then press Source again. All done

I don't have the manual, but I can tell you how to set the clock. This was a doozy to find out exactly how to do this! This technique probably will work with most other Pioneer receivers too.

Either start your car or turn the ignition key to the ACC position (so that the radio is receiving power). With the radio/CD turned off, press and hold the function button (the one in the upper right hand corner) for about 5 seconds, the hours on the clock should start to blink. Use the volume +/- buttons to change the hour, use the track up/down buttons to switch from hour to minutes. Press the power button to get the new time to set.

To set the clock on the Pioneer Moseft leave ignition on accessories, turn radio off make sure clock is blacked out. Hold the volume-on -off for a few seconds and the clock should start flashing then use your arrow keys to set the clock.