Question about AcerScan 620ST Flatbed Scanner

1 Answer

CS2 CAN'T IMPORT MIRASCAN V342BA

I HAVE A 620ST.SCSI INTERFACE. HAVE DOWNLOADED CORRECT DRIVERS FROM BENQ. EVERTHING SEEMS FINE .TEST OK.
PROBLEM IS WONT OPERATE WITH CS2 EVEN THOUGH APPEARS
AS MIRASCAN 342S SELECTION.
CS JUST CLOSES BUT WONT RESTORE.
ANY ADVICE ...MUCH APPRECIATED.
REGARDS OZI

Posted by on

  • Anonymous Apr 20, 2008

    i want driver for acer scan 620st for mac os

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a scanner Vuegen scan brisa 620 st
The change computers and operating system I do not support this model
What can I do?
thanks

Posted on Jun 15, 2008

  • nane nan Jun 15, 2008

    ¿puede alguien ayudarme?

    tengo un escáner vuego scan brisa 620 st y al cambiar de ordenador y de sistema operativo no me lo admite

    ¿son los drivers?

    si es así ¿como puedo hacerme con ellos?

    gracias

×

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I connect a UP-D50 printer with a Sony Vaio?


Use a usb cable or SCSI to usb cable from either a Sony Store or ebay.
Youy will need apropriate drivers for your OS.

Key Features
• Superb Print Quality
• High Speed Printing, A5 Size
• Approximately 300 dpi Resolution
• Standard SCSI Interface, Compatible with
Windows
®
95/98/2000, Windows NT
®
4.0 and
Macintosh
®
OS.
• USB Compatible
*
with Optional SCSI to USB
Converter Cable
• Compact Size

Nov 14, 2014 | Sony VAIO Computers & Internet

1 Answer

My cable that came with my ricoh is01 does not seem to be compatible with with my scanner and neither can I plug it into the pc.


The Ricoh IS01 uses a SCSI 2 (50 pin) interface. It should look like the one here: http://www.amazon.com/Cables-Go-03564-SCSI-2-Cable/dp/B000051312 . There are SCSI to USB converters but I'm not sure if you need a specific version. (Scanners require bidirectional communication with the computer so there were few interfaces that required a special connection.)

Depending on your computer's OS, there may be other issues. (Some may not be compatible with Windows Vista or Win7, for example.) Drivers for some OS versions are available here: http://www.ricoh-usa.com/downloads/downloads.aspx . Search for the IS01 (no other information is needed)

I hope this helps.

Cindy Wells

Jan 01, 2011 | Ricoh Aficio IS01 Flatbed Scanner

1 Answer

Simply need device driver (Adcardv141.exe) or mirascanv342s_baq drv ? for Acerscan 620ST (Prisa) Flatbed Scanner


you did not say which operating system you are using which really is the key to what driver you need. there is a link below to mirascan you can install.
http://www.driverskit.com/freedownload/Scanner/Acer/Mirascan_342s/14009.html

you may want to consider downloading a generic program that i have used in the past. it is not a free service but it works with almost any scanner. The customer service is excellent and replies are within hours if not sooner. the link is listed below.

http://www.hamrick.com/

Jan 07, 2010 | AcerScan 620ST Flatbed Scanner

2 Answers

Drivers for Toshiba satellite A75-S226


here ya go

http://www.officialdrivers.net/toshiba-drivers.php?gclid=CJip5OKvpJsCFQ4MDQodWCAtCg

Jun 25, 2009 | Toshiba Satellite A75-S226 Notebook

1 Answer

BENQ S2W4300U NEED INSTALLATION DRIVER


First, make sure that the SCSI cable is connected properly to your computer and your scanner is turned on. Otherwise, turn on the scanner, enter the Windows Control Panel and click Refresh in Device Manager tab of system.

If this didn't help you to solve the problem, it must be because of driver.

To download the driver for your Benq S2W-4300U, please follow the link:

Benq S2W-4300U driver download

Also, there is no driver available for Windows Vista.

Please rate the solution...

Thank You

Nov 14, 2008 | Acer S2W-4300U Flatbed Scanner

3 Answers

PowerEdge 1750 can not recognize the Local Harddrive


I think you need to provide heaps more info, like what operating system etc.. Have you tried to change the interface to another port eg if IDE, then move the cable to the secondary or if sata test the drive with another cable/port.. Have you tested the drive in another computer? OK, if it's scsi, then does the drive need a termination? Most scsi drives need a dongle or a terminator to allow them to be recognised.

Apr 26, 2008 | Dell PowerEdge 1750 Server

1 Answer

Toshiba DVD ROM SD M1302 driver


If you are using Windows 98, 98SE, ME, 2000, NT or XP, and have an ATAPI/IDE CD/DVD drive, there is no driver needed (see Toshiba statement I have posted below). Under no circumstances, if DVD is properly installed and functional, will you need ANY driver!

If your DVD drive is a SCSI drive, then it may need drivers specific to the SCSI card you have installed (see the specs/manual or website for your card). You may also need the Adaptec SCSI setup, available at this address:

http://www.adaptec.com/worldwide/support/suppbyproduct.jsp?sess=no&language=English+US&cat=%2FTechnology%2FSCSI+Software&fromPage=driverindex

or use this address if you have a LOGIC based SCSI card or device:

http://www.lsilogic.com/

Now, if you meet the criteria for the first paragraph I wrote, and your PC does not load the driver automatically (after a reboot or two) then you have a PHYSICAL or HARDWARE problem. Either the DVD drive is improperly cabled, improperly installed or defective.

Those are all your options. See below, from Toshiba website
good luck
-----------------------
http://sdd.toshiba.com/main.aspx?Path=ServicesSupport/DeviceDrivers

ATAPI CD-ROM and DVD Drivers

Toshiba's CD-ROM and DVD-ROM drives do not require any unique device drivers for Windows '95/'98/2000/XP/NT.
After installing your drive and re-booting, your system should recognize your CD-ROM or DVD-ROM. Win '95/'98/2000/XP/NT Operating Systems support all Toshiba ATAPI CD-ROM and DVD-ROM drives natively.

DOS/Windows 3.x Device Drivers

This device driver is to be used with DOS/Windows 3.x operating systems. Do not use this driver with Windows '95, Windows '98, XP or Windows 2000 unless you are going to use your system in the REAL or MS-DOS Modes. Device drivers for Windows '95, Windows '98, Windows 2000, XP, OS/2, and NT operating systems are provided with the installation or setup software of each operating system.

DOS ATAPI Interface Driver
If you prefer using DOS click the link below to download a MS-DOS ATAPI interface driver.
atapi.exe

SCSI CD-ROM and DVD Drivers

SCSI interface drivers are written for the SCSI card you are using in your system, by the SCSI card manufacturer. They are not specific to your Toshiba drive and are not provided by Toshiba. If during installation Windows can not find the correct SCSI software driver for your SCSI card and you do not have the software driver that came with your SCSI card, contact your SCSI host adapter manufacturer.

Adaptec SCSI Drivers
LSI Logic (Symbios) SCSI Drivers
DVD Viewing Software

Toshibas DVD drives require a third party software to be installed in your system to enable you to view DVD movies. If you purchased your drive as part of a kit, the software may have been included. The links below will provide some possible solutions should you not have this type of software.

Nero6 (Toshiba recommends)

Toshiba does not recommend nor endorse any of the following manufacturers software products. Software names are provided only as a courtesy to our customers. Please check with the software manufacturer to assure that their software supports your drive model.

DirectDVD
Cyberlink PowerDVD
WinDVD
Media Burning Software
Toshiba's recordable drives require third party software to be installed in your system to enable you to burn media. If you purchased your drive as part of a kit, the software may have been included. The link below will provide some possible solutions should you not have this type of software.

Nero6 (Toshiba recommends)

Toshiba does not recommend nor endorse any of the following manufactures software products. Software names are provided only as a courtesy to our customers. Please check with the software manufacturer to assure that their software supports your drive model.

NTI CD & DVD Maker
Gear DVD & CD-RW
Roxio Toast (Macintosh)
Easy CD Creator
Stomp Clinkn Burn Pro

Feb 24, 2008 | Computers & Internet

1 Answer

My dvd burneer wont reconise dvd and dvd_rw discs


Check the blank disks in another computer if you can in case they are damaged and causing a fatal error when your computer tries to read them, and the reboot.

Are you sure it's SCSI and not SATA as scsi isn't very common these days especially on desktop type PC's? Where are you looking to see if the driver is correct?
If the drive is displaying and can be accessed from your operating system then it should be working fine.

Jan 04, 2008 | Pioneer DVR-112D DVD RW Dual Layer Burner

Not finding what you are looking for?
AcerScan 620ST Flatbed Scanner Logo

Related Topics:

299 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Office Equipment & Supplies Experts

jasbo
jasbo

Level 3 Expert

2239 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you an Acer Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...